home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.programmer
- Path: sparky!uunet!mcsun!sunic!kth.se!news.kth.se!ulfis
- From: ulfis@cyklop.nada.kth.se (Anders Ulfheden)
- Subject: Re: UseResFile() problems with CTB Tools
- In-Reply-To: mspace@netcom.com's message of Mon, 07 Sep 92 23:55:16 GMT
- Message-ID: <ULFIS.92Sep8211619@cyklop.nada.kth.se>
- Sender: usenet@kth.se (Usenet)
- Nntp-Posting-Host: cyklop.nada.kth.se
- Organization: Royal Institute of Technology, Stockholm, Sweden
- References: <ULFIS.92Sep8005218@cyklop.nada.kth.se> <+7qn!n-.mspace@netcom.com>
- Distribution: comp
- Date: Tue, 8 Sep 1992 20:16:19 GMT
- Lines: 22
-
- In article <+7qn!n-.mspace@netcom.com> mspace@netcom.com (Brian Hall) writes:
- ulfis@cyklop.nada.kth.se (Anders Ulfheden) writes:
- >Now, I really want to use the refNum to the actual tool and read some font
- >resources. Do I manually have to locate the tool before doing this?
-
- Not to be a pain, but why do you need to do that? The only reason I ever
- came up with for that was printing, but you can always TMPaint to a
- printer grafport for that.
-
- The tool itself contains font information to be used in the tools settings
- dialog. I should read this information from the tool to make my custom choose
- dialog look good.
-
- Brian Hall mspace@netcom.com
-
- ulfis
- --
- +------------------------------------------------------------------------------
- | Anders Ulfheden
- | USENET: ulfis@nada.kth.se AppleLink: SW0429
- | Royal Institute of Technology
- | Stockholm, Sweden
-