home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!portal!cup.portal.com!Gleeep
- From: Gleeep@cup.portal.com (Dave - Silon)
- Newsgroups: comp.sys.mac.hardware
- Subject: Re: Opening a powerbook
- Message-ID: <65817@cup.portal.com>
- Date: Sun, 13 Sep 92 19:45:35 PDT
- Organization: The Portal System (TM)
- Distribution: world
- References: <1992Sep13.204921.3326@panix.com>
- Lines: 8
-
- They're not hard to open - you can find the torx wrench at most hardware
- stores. However, the 100 is also relatively easy to damange unless you
- are very careful to remove the batteries before you pull it apart. I know
- of at least 2 units that had their fuses blow because of this. So, if you
- want to take it apart, make sure that you remove both the battery pack and
- the batteries in the back.
-
- -Gleeep
-