home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.hardware
- Path: sparky!uunet!cs.utexas.edu!wupost!darwin.sura.net!uvaarpa!murdoch!poe.acc.Virginia.EDU!dd2u
- From: dd2u@poe.acc.Virginia.EDU (David Drucker)
- Subject: Re: Looking for X10 controller interface
- Message-ID: <1992Sep12.043418.10911@murdoch.acc.Virginia.EDU>
- Sender: usenet@murdoch.acc.Virginia.EDU
- Organization: University of Virginia
- References: <1992Sep10.145041.11680@cbfsb.cb.att.com>
- Date: Sat, 12 Sep 1992 04:34:18 GMT
- Lines: 28
-
- mstov@cbnewsb.cb.att.com writes:
- > Hi!
- >
- > Does anyone know of a Mac interface to X10 home control stuff? I would like
- > to play around with controlling devices from my Mac and would like to find an
- > X10 interface box that can be connected to the serial port or a nubus slot.
- >
- > Also, if you know where I can find more information about the X10 protocol,
- > please send me pointers. If there is interest, I will summarize to the net.
-
- Mike,
- The last known address for the X-10 (USA) INC. is/was
- 185A LeGrande Ave.
- Northvale, NJ 07647
- (201)784-9700
-
- I have the IBM version and the MAC is available as well as the
- codes needed to "do it your self".
-
- DAK was the main supplier for awhile but I also do not know if
- they still sell them.
-
-
- David Drucker
- Curry School of Education
- UVA
- DD2U@virginia.edu
- --
-