home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!sun-barr!ames!agate!usenet.ins.cwru.edu!cleveland.Freenet.Edu!cf043
- From: cf043@cleveland.Freenet.Edu (Lance K. Chun)
- Newsgroups: comp.sys.mac.hardware
- Subject: Help! Please Help! PB100
- Date: 12 Sep 1992 02:22:57 GMT
- Organization: Case Western Reserve University, Cleveland, OH (USA)
- Lines: 23
- Message-ID: <18rka1INN7uv@usenet.INS.CWRU.Edu>
- Reply-To: cf043@cleveland.Freenet.Edu (Lance K. Chun)
- NNTP-Posting-Host: hela.ins.cwru.edu
-
-
- I recently purchased a PB 100 2/20 from WEA. I am trying to connect
- it to my IIci at home via the SCSI mode/cable. HAS ANYONE acheived this?
- I purchased a HDI 30 to 50 Centronix cable to connect my PB 100 to my
- external hard drives. But IT IS NOT WORKING!!! What is going on?
- Is the cable bad?--it is not by APPLE. Or is my PB bad. In the manual
- is says that as long as the HDI 30 side is connected to my
- PB 100, when I boot, it should show a SCSI icon with the
- SCSI id #, but mine doesn't do that. It boots up as usual.
- Now, if I connect the other side of the cable (50 centronix)
- to the external drive's SCSI port, my PB 100 freezes and
- gives me that dumb floppy with ? mark icon. HELP!!
-
- Please share your experiences with me, be they good or
- bad, I just need some feedback of any sort.
-
- Help!
- Lance
- --
- Lance K. Chun - cf043@cleveland.freenet.edu | Live |
- Photography Major - Fashion/Illustration/Advertising | Long |
- Brooks Institute of Photography, Santa Barbara, CA | & |
- Paul Tsongas '96! Paul Tsongas '96! Paul Tsongas '96! |Prosper|
-