home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.hardware
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!mojo.eng.umd.edu!russotto
- From: russotto@eng.umd.edu (Matthew T. Russotto)
- Subject: Re: Magic MO and SCSI problems
- Message-ID: <1992Sep07.170523.15346@eng.umd.edu>
- Date: Mon, 07 Sep 92 17:05:23 GMT
- Organization: College of Engineering, University of Maryland, College Park
- References: <1992Sep7.003513.1291@pasteur.Berkeley.EDU>
- Lines: 21
-
- In article <1992Sep7.003513.1291@pasteur.Berkeley.EDU> lari@robotics.berkeley.edu writes:
- >
- >disk at SCSI address 0, but starting from a floppy is also impossible.
- >The hard disk is making some noise, then everything
- >that appear is the little floppy with 0? flashing.
- >I tried everything. It cannot be the termination or the cable, because I
- >try to put on the MO instead of the CD-ROM, with the same cable and
- >termination
-
- It could still be termination-- for instance, the MO could be
- internally terminated.
-
- But it sounds like it could also be that the SCSI address is 0--
- perhaps the cable that connects to the SCSI ID switch and to the
- jumper area on the drive has fallen off.
-
- --
- Matthew T. Russotto russotto@eng.umd.edu russotto@wam.umd.edu
- Some news readers expect "Disclaimer:" here.
- Just say NO to police searches and seizures. Make them use force.
- (not responsible for bodily harm resulting from following above advice)
-