home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #20 / NN_1992_20.iso / spool / comp / sys / ibm / ps2 / hardware / 1598 < prev    next >
Encoding:
Internet Message Format  |  1992-09-08  |  1.1 KB
  1. Path: sparky!uunet!cs.utexas.edu!torn!news.ccs.queensu.ca!qucdn!gerlachj
  2. Organization: Queen's University at Kingston
  3. Date: Tuesday, 8 Sep 1992 09:54:28 EDT
  4. From: Jim Gerlach <GERLACHJ@QUCDN.QueensU.CA>
  5. Message-ID: <92252.095428GERLACHJ@QUCDN.QueensU.CA>
  6. Newsgroups: comp.sys.ibm.ps2.hardware
  7. Subject: Re: Help! error on bootup "hit F1....."?
  8. References:  <Bu8qvI.657@news.cso.uiuc.edu>
  9. Lines: 17
  10.  
  11. Error code 164  Memory Size Error-(Run SETUP); CMOS setting does not match
  12.                 memory
  13.  
  14. After adding memory you have to re-configure your computer. You must boot
  15. the computer with the Model 30 286 refence disk (may be labelled Starter
  16. disk?) that came with the computer, then follow instructions. This disk
  17. is very important, make a backup as instructed.
  18.  
  19. Hope this helps,
  20.  
  21. Jim
  22.  
  23. Jim Gerlach - Cancer Research Laboratories
  24. James.H.Gerlach@QueensU.CA                    Queen's University
  25. GERLACHJ@QUCDN.QueensU.CA (NetNorth/BITNET)   Room A309A, Botterell Hall
  26. tel (613) 545-6446                            Kingston, Ontario
  27. fax (613) 545-6830                            CANADA  K7L 3N6
  28.