home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!mcsun!sunic!ugle.unit.no!lise.unit.no!abrend
- From: abrend@Lise.Unit.NO (Andreas Brendstuen)
- Subject: problem with s3 local bus
- Message-ID: <1992Sep15.162042.29846@ugle.unit.no>
- Sender: news@ugle.unit.no (NetNews Administrator)
- Organization: Norwegian Institute of Technology
- Date: Tue, 15 Sep 92 16:20:42 GMT
- Lines: 13
-
- I have a problem with my new pc. My s3 local bus vga card will not support the
- highest resolution supported by my monitor. The card has 1 MB vram and the
- dipswitches are correctly set, also the jumpers on the card. The monitor is a
- Phillips Brilliance 1420 and should support 1024x768 NI. The dealer's serviceman
- suggested that the card could be uncorrectly aligned in the local bus connection.
- I've tried to put it right and I don't think that this is the problem. The card
- runs in a i486dx 50MHz based PC. If anyone have had a similar problem and know
- the possible solution, please answer this note!!!!!!!!!!!!!!!!!!!!!!!!!
-
- Please answer by EMail: abrend@lise.unit.no
-
- -----
- Andreas
-