home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!sun-barr!olivea!spool.mu.edu!sdd.hp.com!uakari.primate.wisc.edu!nntp.msstate.edu!news
- From: mrr1@Ra.MsState.Edu (mark r rauschkolb)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: Hard drive won't work with WD controller
- Message-ID: <1992Sep14.160723.13314@ra.msstate.edu>
- Date: 14 Sep 92 16:07:23 GMT
- Sender: news@ra.msstate.edu
- Reply-To: mrr1@Ra.MsState.Edu
- Organization: Mississippi State University
- Lines: 14
- Nntp-Posting-Host: isis.msstate.edu
-
-
- I have a Miniscribe 8438 RLL drive and a WD1006V-SR2 controller.
- The hard disk works fine with an ACB2370 controller, and other disks
- work fine with the WD controller.
-
- I have the WD low level utility and have the suggested numbers for
- the Drive. It Low Level formats OK, but then will not boot (boot from
- drive A, nothing will admit the drive exists, or gets a drive not ready
- error)
-
- Any Suggestions?
-
- Mark
- mrr1@ra.msstate.edu
-