home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zephyr.ens.tek.com!tekgen!boblu
- From: boblu@tekgen.bv.tek.com (Robert Luneski)
- Newsgroups: comp.sys.atari.st.tech
- Subject: Re: problems w/ 2 SCSI drives on ST
- Keywords: SCSI, GE-Soft, ST157N, ST296N, SCSI-Tools
- Message-ID: <1239@tekgen.bv.tek.com>
- Date: 9 Sep 92 15:10:19 GMT
- References: <H._49DdC_yXeQ@wpcst1.phys-chemie.uni-wuerzburg.dbp.de>
- Organization: Tektronix, Inc.
- Lines: 19
-
- In article <H._49DdC_yXeQ@wpcst1.phys-chemie.uni-wuerzburg.dbp.de> kruel@wpcst1.phys-chemie.uni-wuerzburg.dbp.de (Thomas-Martin Kruel) writes:
- >Dear netters,
- >
- > I have a little problem with two SCSI discs on my host adaptor:
- >they won't work together with addresses 0 and 1.
- >
- > Is it absolutely necessary to remove the resistor packs ? If so,
- >which drive ? The physically last or the logically last one (which is
- >different in that case) ?
- >
-
- Yes, it is absolutely necessary that you remove the terminating resistor
- packs on all but the last physical drive in the SCSI chain.
-
- ____ ____
- /\/\/\ Bob Luneski Diamond Back II, Diamond Edge, and UVK Support: /\/\/\
- \/\/\/ Oregon Research Associates boblu@tekgen.bv.tek.com \/\/\/
- \/\/ 16200 S.W. Pacific Hwy., Suite 162 Genie: ORA.TECH \/\/
- \/ Tigard, OR 97224 Phone: (503) 620-4919 FAX: (503) 639-6182 \/
-