home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!spool.mu.edu!yale.edu!ira.uka.de!math.fu-berlin.de!informatik.tu-muenchen.de!rz.uni-passau.de!platon.fmi.uni-passau.de!burkert1
- From: burkert1@platon.fmi.uni-passau.de (Klaus Burkert)
- Subject: Re: GVP-II & A2090
- Message-ID: <1992Sep10.163326.8455@tom.rz.uni-passau.de>
- Sender: news@tom.rz.uni-passau.de (News-Operator)
- Nntp-Posting-Host: vergil.fmi.uni-passau.de
- Organization: University of Passau, Germany
- References: <1992Sep8.045151.7418@lugb.latrobe.edu.au> <xAyEr*m40@prolix.apana.org.au>
- Date: Thu, 10 Sep 1992 16:33:26 GMT
- Lines: 23
-
- In article <xAyEr*m40@prolix.apana.org.au> dac@prolix.apana.org.au (Andrew Clayton) writes:
- [...]
- >I am using a GVP Series 2 with 200Mb Quantum Pro, as well as my
- >original 2090a disk controller with 44Mb ST506 Rodime.
- >
- >I did try having three HD's running, but the system seemed to get
- >flaky [too much power consumption with the accellerator card, two
- >disk controllers and a dual serial boad], so I'm back to two.
-
- Maybe you should take the power for the HDs straight from the power-supply
- instead from the controllers...
- My 2000 runs with A2630, GVP-II, 4 HDs, 1 Tape, 4 Disk-drives, a BB with VGA
- and an Amiga-Gfx-card plus Flickerfixed and 2MB chipram without problems...
- You see: a heavy loaded system...
- When I took the power from the Filecard the machine went flaky too but
- this was fixed by using it direct from the supply.
-
- Ciao, Klaus.
-
- -----------------------------------------------------------
- Klaus Burkert email: burkert1@kirk.fmi.uni-passau.de
- Brandweg 11 voice: +49-851/83993 (only pm please)
- D-W-8390 Passau / Federal Republic of Germany
-