home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!van-bc!tfbbs!Dana_Huggard
- From: Dana_Huggard@tfbbs.wimsey.bc.ca (Dana Huggard)
- Newsgroups: comp.sys.amiga.datacomm
- Subject: Re: help DLG-Pro and SupraFaxModem
- Distribution: world
- Message-ID: <Dana_Huggard.02km@tfbbs.wimsey.bc.ca>
- Date: 5 Sep 92 17:33:21 PST
- Organization: TERRA FIRMA BBS
- Lines: 38
-
- In a message dated Mon 31 Aug 92 3:35, Lauwilli@nmsu.edu (williams) wrote:
-
- L> I am haveing problems with DLG-Pro and my Supra Fax modem V32.bis.The
- L> maximum baud rat of the modem is 19200 but it only connects at 2400.
-
- I'm running DLG with the SupraFAX as well.. (Are you using TrapDoor as
- well?)
-
- I had that happen.. (and many other strange things), for about 3 days after
- I bought mine. I eventually cured it with an AT&F2&W. I did tweek a
- couple of other things I don't quite recall presently(!).. one was S11. You
- want to head for a reliable connection. Set your Amiga Serial Preferences
- at 19200 RTS/CTS. Lock the Baudrate with TrapDoor if you are using it. You
- want the modem to give as much verbose info as it can.. When TrapDoor
- connects I'll get something like
-
- CONNECT: 2400 CONNECT 14400
-
- PROTOCOL: NONE OR! PROTOCOL: LAP-M
-
- CARRIER: 2400 CARRIER: 14400
-
- ... That type of thing.
-
- Maybe you've got it already. It's not a bad manual.. actually the way
- it sounds like you want to get the connect match the carrier. I used to see
- 19200 when it was really 2400. I knew something was sort'a screwy. Not sure
- what may really be happening with yours as I don't know who you'd be
- connecting to...
- Hope this helps though.
-
- Best of luck to'ya.
-
- Dana_Huggard (1:153/765.0@fidonet * 40:800/765.0@Amiganet * ADS * SAN * )
-
-
- -- Via DLG Pro v0.992
-
-