home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cis.ohio-state.edu!zaphod.mps.ohio-state.edu!sdd.hp.com!caen!sol.ctr.columbia.edu!lll-winken!overload.lbl.gov!dog.ee.lbl.gov!news!nosc!suned1!TASVAX.NSWSES.NAVY.MIL!GORDON
- From: gordon@TASVAX.NSWSES.NAVY.MIL (Gordon C. Zaft)
- Newsgroups: comp.sys.3b1
- Subject: Re: Help with EIA Combo board... What is cmbpcnt?
- Message-ID: <22258@suned1.Nswses.Navy.MIL>
- Date: 11 Sep 92 22:18:14 GMT
- References: <1992Sep11.114807.1@orion.yorku.ca>
- Sender: news@suned1.nswses.navy.MIL
- Reply-To: gordon@TASVAX.NSWSES.NAVY.MIL
- Organization: Naval Surface Warfare Center, Port Hueneme Division
- Lines: 20
-
- In article <1992Sep11.114807.1@orion.yorku.ca>, haroldt@orion.yorku.ca writes:
- >
- >However... The software that came with the board for driving
- >the additional two serial ports does not work. It reaches
- >as far as the line (see /etc/lddrv/cmb.rc):
- > /etc/lddrv/cmbpcnt -c
-
- If this isn't in the FAQ, it ought to be. 3.51m, I believe, had an update to
- the combo driver that works. You need to use that driver, not the one
- that came with the board.
-
- Someone want to check my facts?
-
-
-
- ----
- Gordon Zaft PHD NSWC Code 4Y33 Port Hueneme, CA 93043-5007
- gordon@tasvax.nswses.navy.mil | zaft@suned1.nswses.navy.mil
- "Usenet is a right, a left, a jab, and a sharp uppercut to the jaw.
- The postman hits! You have new mail." -- Ed Vielmetti
-