NetNews Usenet Archive 1992 #20/NN_1992_20.iso/spool/comp/sources/misc/3973

Text File | 1992-09-15 | 27.0 KB | 936 lines

Newsgroups: comp.sources.misc
Path: sparky!kent
From: [e-mail] (Warren Tucker)
Subject:  v32i081:  ecuman - Manual for ECU comm package rev 3.20, Part05/05
Message-ID: <[e-mail]>
Followup-To: comp.sources.d
X-Md4-Signature: 5e242a8f6e492c1945edd6d89e5be414
Sender: [e-mail] (Kent Landfield)
Organization: Sterling Software
References: <csm-v32i077=[e-mail]>
Date: Tue, 15 Sep 1992 16:58:09 GMT
Approved: [e-mail]
Lines: 921

Submitted-by: [e-mail] (Warren Tucker)
Posting-number: Volume 32, Issue 81
Archive-name: ecuman/part05
Environment: SCO,XENIX,ISC,SUNOS,SYSVR4,HDB,Curses
Supersedes: ecuman: Volume 21, Issue 90-93

---- Cut Here and feed the following to sh ----
#!/bin/sh
# this is ecuman320.05 (part 5 of ecuman320)
# do not concatenate these parts, unpack them in order with /bin/sh
# file doc/proc.man continued
#
if test ! -r _shar_seq_.tmp; then
    echo 'Please unpack part 1 first!'
    exit 1
fi
(read Scheck
 if test "$Scheck" != 5; then
    echo Please unpack part "$Scheck" next!
    exit 1
 else
    exit 0
 fi
) < _shar_seq_.tmp || exit 1
if test ! -f _shar_wnt_.tmp; then
    echo 'x - still skipping doc/proc.man'
else
echo 'x - continuing file doc/proc.man'
sed 's/^X//' << 'SHAR_EOF' >> 'doc/proc.man' &&
X    return/linefeed pairs.  If '-a' is omitted,    the file(s) are    transmitted
X    without modification.  If '-l' is supplied,    then <label-str> specifies a
X    string to display on the bottom of the file    transfer screen.  If '-l' is
X    omitted, then <label_str> must also    be omitted.
X
X    Integer variable $i0 receives the exit status from the transfer. If    0,
X    transfer was normal.  Note:    procedure execution IS terminated by a
X    SIGINT to the spawned file transfer    process.  This is different than for
X    versions prior to 3.10.  If    $i0 is set to -1, the file transfer program
X    did    not begin.
X
X
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      68
X
X
X
X    Examples:
X
X    sx -al 'sending    log file' '/tmp/log.file'
X    sx -
X
X
X
X    6.77  sy
X
X
X    usage: sy [-a[l]] [<label-str>] <filelist-str>
X
X    This command invokes the YMODEM Batch (not to be confused with XMODEM-
X    1K)    file transfer protocol to send one or more files.
X
X    If switch '-a' is supplied,    newlines are converted to carriage
X    return/linefeed pairs.  If '-a' is omitted,    the file(s) are    transmitted
X    without modification.  If '-l' is supplied,    then <label-str> specifies a
X    string to display on the bottom of the file    transfer screen.  If '-l' is
X    omitted, then <label_str> must also    be omitted.
X
X    Integer variable $i0 receives the exit status from the transfer. If    0,
X    transfer was normal.  Note:    procedure execution IS terminated by a
X    SIGINT to the spawned file transfer    process.  This is different than for
X    versions prior to 3.10.  If    $i0 is set to -1, the file transfer program
X    did    not begin.
X
X
X    6.78  system
X
X
X    usage: system [-ls]    <cmdstr>
X
X    <cmdstr> is    passed to the Bourne shell.
X
X    If switch '-l', is supplied, the attached communications line becomes
X    the    stdin and stdout for the command.
X
X    If switch '-s', is supplied, all ECU file descriptors remain open.    The
X    -s option is important to include if you pass the ECU line file
X    descriptor to another process.
X
X    Integer variable $i0 is set    to the spawned process'    exit status if the
X    process exits "normally", or 0x100 if the process is killed, dumps core
X    or interrupted.
X
X    Note:  procedure execution is NOT terminated by a SIGINT to    the spawned
X    process.  It is the    responsibility of the procedure    to process the exit
X    status returned in $i0.  If    $i0 is set to -1, the file transfer program
X    did    not begin.
X
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      69
X
X
X
X    Examples:
X
X        $s2    = '/tmp/ecu'+%itos(%pid,05)
X    system ' fgrep foo bar > '+$s2
X
X    system -s '/etc/NBSsetclk -i '+%itos(%conn)
X
X
X
X    6.79  sz
X
X
X    usage: sz [-anf[l]r] [<label-str>] <filelist-str>
X
X    This command sends files using ZMODEM/CRC-32.  The remote protocol must
X    have been started prior to the execution of    this command unless the
X    remote has automatic ZMODEM    frame detection.
X
X    Switch '-a'    specifies an ASCII transfer; the default is binary.
X
X    Switch '-f'     causes    the full pathname of each file to be sent;
X    otherwise, the simple filename is transmitted.
X
X    Switch '-l'    with the <label-str> argument specifies    a string to display
X    on the bottom of the file transfer screen.    If '-l'    is omitted, then
X    <label_str>    must also be omitted.
X
X    Switch '-n'    causes the receiver to accept files with do not    already
X    exist at the remote    system or which    have older times of  last access
X    that at the    sending    system.     Not all remote    protocol software will
X    accept or obey this    option.
X
X    Switch '-r'    causes an interrupted file transfer to be resumed.  if the
X    remote receiver supports the ZMODEM    protocol feature.
X
X    Integer variable $i0 receives the exit status from the transfer. If    0,
X    transfer was normal.  Other    $i0 values possible:
X
X      1-126:   count of    files not transmitted (see ~/.ecu/log)
X      127:     127 or more files not transmitted (see ~/.ecu/log)
X
X    Other ecusz    error codes are    shown here for refernce, but they are
X    converted by ECU to    printed    messages and result in procedure
X    termination.
X
X      128-192: process terminated with signal==code-128
X           signal 0    == program logic error
X      253:     could not open any files
X      254:     protocol    failed (bad line conditions,brain dead remote)
X      255:     usage
X
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      70
X
X
X
X    Note: procedure execution IS terminated by a SIGINT    to the spawned file
X    transfer process.  This is different than for versions prior to 3.10.
X    If $i0 is set to -1, the file transfer program did not begin.
X
X
X    6.80  vidcolor
X
X
X    usage: vidcolor <type> <fcolor> [<bcolor>]
X
X    This command allows    control    over the internal color    choices    ECU makes.
X    <type> must    be one of the following:
X
X
X     normal      - normal video color
X     reverse  - reverse video color
X     notify      - color used for low key notifications such as
X            "[interactive mode]" and "[procedure finished]"
X     success  - color used for modem CONNECT messages and other
X            "success" notifications
X     alert      - color used to alert    user for warning or caution
X            purposes
X     error      - color used to display error    status or messages
X
X
X    <fcolor> and <bcolor> are color names as described in the description of
X    the    color command. <fcolor>    choses the foreground color and    must be
X    supplied.  <bcolor>    choses the background color and    is optional; if    not
X    supplied, the background color is black.
X
X    Note: The vidcolor normal and reverse options are analogs of the color
X    and    color -r command.
X
X
X    Examples:  (showing    ECU default internal color list)
X
X    vidcolor normal    lt_green
X    vidcolor reverse red white
X    vidcolor notify    gray
X    vidcolor success lt_green
X    vidcolor alert yellow
X    vidcolor error red
X
X
X
X    6.81  vidnorm
X
X
X    usage: vidnorm
X
X    This command causes    later screen output to appear in the normal, as
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      71
X
X
X
X    opposed to reverse video mode.  The    color command forces normal video
X    mode.
X
X
X    6.82  vidrev
X
X
X    usage: vidrev
X
X    This command causes    later screen output to appear in the reverse, as
X    opposed to normal video mode.  The color command forces normal video
X    mode.
X
X
X    6.83  whilei
X
X
X
X    usage: whilei <int>    <rel-op> <int> <statement>
X       whilei <int>    <rel-op> <int>
X           <statement>
X       whilei <int>    <rel-op> <int>
X       {
X           any kind    or number of statements
X           (labels are not allowed inside braces)
X       }
X
X
X    This command executes a loop one or    more statements    based on a test    of
X    two    integer    quantities.  The <rel-op> argument is descibed in a earlier
X    subsection titled "Relational Operators." See the description of the
X    break, continue, and else commmands    and many other examples    throughout
X    the    document, for examples of how the command is used.
X
X    6.84  whiles
X
X
X
X    usage: whiles <str>    <rel-op> <str> <statement>
X       whiles <int>    <rel-op> <int>
X           <statement>
X       whiles <int>    <rel-op> <int>
X       {
X           any kind    or number of statements
X           (labels are not allowed inside braces)
X       }
X
X
X    This command executes a loop of one    or more    statements based on a test
X    of two string values. The <rel-op> argument    is descibed in a earlier
X    subsection titled "Relational Operators." See the description of the
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      72
X
X
X
X    break, continue, and else commmands    and many other examples    throughout
X    the    document, for examples of how the command is used.
X
X    6.85  xon
X
X
X
X    usage: xon <arg>
X    where <arg>    is on     input and output flow control
X           off     no flow control
X           in     input flow control
X           out     output    flow control
X
X
X    This command enables or disables xon/xoff flow control.
X
X
X    Examples:
X
X    hangup
X    dial 'mysys'
X    ifi %conn != 0 parity none;xon on
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      73
X
X
X
X    7.    Special    Procedures
X
X
X    ECU    provides for special "hook" procedures to be executed at certain
X    times.  Their use is encouraged, but you must take precautions not to
X    excecute any unreasoable commands in them, for the are rather "raw"
X    hooks and it is easily possible to confuse ECU by performing illogical
X    operations in them.    Judicious use can, however, be quite productive.
X
X    They are searched for in the same manner as    any other procedure, so    you
X    can    have a customised version of them in a working directory and a
X    default in your ~/.ecu subdirectory.  No error is reported if they are
X    not    found.
X
X
X    7.1     _rc.ep
X
X
X    Afer ECU is    initialized, but before    it presents the    setup screen or
X    executes a -p initial procedure, procedure '_rc' is    executed with no
X    arguments.    (It is named in    the tradition of /etc/rc, .mailrc, etc..)
X    This procedure can be used to customize the    ecu environment    prior to
X    beginning the usual    operation.  This is not    a place    to do any dialing or
X    long-lived operations, nor is it possible to bypass    the setup screen:
X    for    this, use the -p initial procedure.
X
X    The    %getenv() function may be useful in here (Am I running on an xterm?
X    Do I want to change    the prompt string from the default environment
X    variable $ECUPROMPT?).
X
X    Procedure commands likely to be of interest    here:
X
X       autorz
X     * baud
X       color
X       dcdwatch
X     * duplex
X       prompt
X       rtscts
X     * setline
X
X
X    Commands marked with an asterisk affect the    initial    (default) values
X    presented on the setup screen.
X
X    If _rc.ep returns a    non-zero status    or fails (due to syntax    or other
X    error), ecu    terminates immediately.
X
X
X
X
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      74
X
X
X
X    7.2     _connect.ep
X
X
X    This procedure is executed after every connection success after the
X    CONNECT message ("result code") is printed.     It is passed one argument,
X    the    "result    code" string generated by the dialer function (e.g.,
X    "CONNECT 19200").
X
X    You    may use    %rname and other functions and features    to customize this
X    function based on the particular system just reached.  Note    that integer
X    variable $i0 and string variable $s0 set zero prior    to executing the
X    function.  This function may modify    the behavior of    coorperating dialer
X    functions by setting the value of numbered string or integer variables.
X    In particular, the dialer function will inherit the    values of $i0 and
X    $s0    when this special function terminates.    Be careful of what you do in
X    here since MANY ecu    procedure commands affect $i0 and $s0 as a side
X    effect of their operation.    Even if    you know what you do in    _connect.ep
X    does not modify $i0    or $s0,    use of the preservation    technique shown    in
X    the    example    below may save you headaches if    you add    to the function    in
X    the    future (long after you have forgotten this pedantic admonition).
X
X    If this procedure fails (abnormal procedure    termination or non-zero
X    return code), ECU hangs up on the line and proceeds    as if the connection
X    failed.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      75
X
X
X
X    Example:
X    #+------------------------------------------------------------------
X    #  _connect.ep - post-CONNECT special "hook" procedure
X    #-------------------------------------------------------------------
X    #+:EDITS:*/
X    #:09-10-1992-13:58-wht@n4hgf-ECU release 3.20
X    #:08-22-1992-15:38-wht@n4hgf-ECU release 3.20 BETA
X    #:07-13-1991-14:47-wht@n4hgf-creation
X
X      $iv0_save    = $i0  # it is a VERY good idea    to save    the dialer
X      $sv0_save    = $s0  # function return status
X               # since gobs of functions and commands modify $i0
X               # and/or    $s0 as a side effect of    their operation
X
X      $s30 = '_connect '+%rname+' ('+%argv(1)+')'
X      echo $s30           # this still will also live to be visible by
X               # the dialer function
X
X      ifi %baud    > 2400
X      {
X     xon    off    # turn XON/XOFF off first, then ...
X     rtscts    on     # turn on RTS/CTS
X      }
X      else
X      {
X     rtscts    off    # turn off RTS/CTS, then    ...
X     xon    on     # turn XON/XOFF on
X      }
X
X      $i0 = $iv0_save  # restore dialer    return status
X      $s0 = $sv0_save
X
X
X
X    7.3     _connfail.ep
X
X
X    This procedure is executed after every connection failure after the
X    failure message ("result code") is printed.     It is passed two arguments,
X    the    logical    system name (the dial directory    entry name or the phone
X    number) and    the "result code" string generated by the dialer function
X    (e.g., "BUSY").  The function is called after $i0 has been set to 1    and
X    $s0    has been set to    the result code.  This function    may modify the
X    behavior of    coorperating dialer functions by setting the value of
X    numbered string or integer variables.  In particular, the dialer
X    function will inherit the values of    $i0 and    $s0 when this special
X    function terminates.  Be careful of    what you do in here since MANY ecu
X    procedure commands affect $i0 and/or $s0 as    a side effect of their
X    operation.    See _connect.ep    above for further screams and moans.
X
X    ]If    you get    very involved with using this procedure, you'll    sooner or
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X    ECU    Procedure Language                      76
X
X
X
X    later run into some    undocumented $so values.  You'll have to take a    look
X    at ecuDCE.c    and hdbintf.c for an authoritative reference, but perhaps
X    you    can get    along by knowing that result codes with    an exclamation point
X    as their first character are generated by ECU.
X
X    ECU    ignores    any failure (abnormal procedure    termination or non-zero
X    return code) resulting from    the execution of this procedure.
X
X
X    7.4     _hangup.ep
X
X
X    This procedure is executed after every connection termination.  It is
X    passed one argument, a string representation of the    number of seconds
X    you    were connected.     You may use %rname and    other functions    and features
X    to customize this function based on    the particular system just reached.
X    ECU    ignores    any error returned by the procedure.  ECU ignores any
X    failure (abnormal procedure    termination or non-zero    return code)
X    resulting from the execution of this procedure.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X    Public Domain by wht@n4hgf                 9/10/92
X
X
X
X
X
X
X
X
X
X
X
X                    CONTENTS
X
X
X    1.    Introduction........................................   2
X
X    2.    Line Syntax (Labels, Commands and Comments).........   3
X
X    3.    Arguments...........................................   4
X    3.1   Switches......................................   4
X    3.2   Alphabetic Tokens.............................   4
X    3.3   Integers......................................   4
X          3.3.1   Constants.............................   4
X          3.3.2   Variables.............................   5
X          3.3.3   Functions.............................   5
X          3.3.4   Expressions...........................   5
X          3.3.5   Relational Operators..................   6
X    3.4   Strings.......................................   6
X          3.4.1   Constants.............................   6
X          3.4.2   Variables.............................   7
X          3.4.3   Functions.............................   7
X          3.4.4   Expressions...........................   7
X          3.4.5   Relational Operators..................   7
X
X    4.    Integer    Functions...................................   9
X    4.1   %argc.........................................   9
X    4.2   %baud.........................................   9
X    4.3   %colors.......................................   9
X    4.4   %cols.........................................  10
X    4.5   %conn.........................................  11
X    4.6   %curx.........................................  11
X    4.7   %cury.........................................  11
X    4.8   %csec.........................................  11
X    4.9   %ctoi.........................................  11
X    4.10  %esecs........................................  11
X    4.11  %fatime.......................................  12
X    4.12  %fmode........................................  12
X    4.13  %fmtime.......................................  12
X    4.14  %fmode........................................  13
X    4.15  %ftell........................................  13
X    4.16  %instr........................................  13
X    4.17  %ischr........................................  14
X    4.18  %isdir........................................  14
X    4.19  %isreg........................................  15
X    4.20  %len..........................................  15
X    4.21  %lgetc........................................  16
X    4.22  %lines........................................  16
X    4.23  %nice.........................................  16
X    4.24  %pid..........................................  16
X    4.25  %match........................................  16
X    4.26  %mhack........................................  17
X    4.27  %rchr.........................................  17
X
X
X
X                   - i -
X
X
X
X
X
X
X
X
X
X
X
X    4.28  %rchrc........................................  17
X    4.29  %rinstr.......................................  18
X    4.30  %shmid........................................  18
X    4.31  %stoi.........................................  18
X    4.32  %uid..........................................  19
X    4.33  %xchr.........................................  19
X    4.34  %xchrc........................................  19
X
X    5.    String Functions....................................  20
X    5.1   %argv.........................................  20
X    5.2   %basename.....................................  21
X    5.3   %cgetc........................................  21
X    5.4   %cgets........................................  21
X    5.5   %chr..........................................  21
X    5.6   %date.........................................  22
X    5.7   %datez........................................  22
X    5.8   %day..........................................  22
X    5.9   %dayz.........................................  22
X    5.10  %dir..........................................  22
X    5.11  %dirpart......................................  23
X    5.12  %edate........................................  23
X    5.13  %envvar.......................................  23
X    5.14  %errstr.......................................  24
X    5.15  %etime........................................  24
X    5.16  %filepart.....................................  24
X    5.17  %fmodestr.....................................  25
X    5.18  %itos.........................................  25
X    5.19  %left.........................................  26
X    5.20  %line.........................................  26
X    5.21  %logname......................................  27
X    5.22  %mid..........................................  27
X    5.23  %month........................................  27
X    5.24  %rdesc........................................  27
X    5.25  %right........................................  28
X    5.26  %rname........................................  28
X    5.27  %rtelno.......................................  28
X    5.28  %time.........................................  28
X    5.29  %times........................................  29
X    5.30  %timez........................................  29
X    5.31  %timezs.......................................  29
X    5.32  %tty..........................................  29
X    5.33  %uname........................................  29
X
X    6.    Commands............................................  30
X    6.1   autorz........................................  30
X    6.2   baud..........................................  30
X    6.3   break.........................................  30
X    6.4   cd............................................  31
X    6.5   clrx..........................................  31
X    6.6   cls...........................................  32
X    6.7   color.........................................  32
X
X
X
X                   - ii -
X
X
X
X
X
X
X
X
X
X
X
X    6.8   continue......................................  32
X    6.9   cursor........................................  33
X    6.10  dcdwatch......................................  34
X    6.11  delline.......................................  34
X    6.12  dial..........................................  34
X    6.13  do............................................  36
X    6.14  duplex........................................  36
X    6.15  echo..........................................  37
X    6.16  eeol..........................................  37
X    6.17  else..........................................  37
X    6.18  exec..........................................  38
X    6.19  exit..........................................  39
X    6.20  expresp.......................................  40
X    6.21  fchmod........................................  42
X    6.22  fclose........................................  43
X    6.23  fdel..........................................  43
X    6.24  fgetc.........................................  43
X    6.25  fgets.........................................  44
X    6.26  fkey..........................................  44
X    6.27  fkmap.........................................  44
X    6.28  flush.........................................  45
X    6.29  fopen.........................................  45
X    6.30  fputc.........................................  46
X    6.31  fputs.........................................  47
X    6.32  fseek.........................................  47
X    6.33  getf..........................................  47
X    6.34  gosub.........................................  48
X    6.35  gosubb........................................  49
X    6.36  goto..........................................  49
X    6.37  gotob.........................................  50
X    6.38  hangup........................................  50
X    6.39  hexdump.......................................  50
X    6.40  home..........................................  51
X    6.41  icolor........................................  51
X    6.42  ifi...........................................  52
X    6.43  ifs...........................................  52
X    6.44  insline.......................................  52
X    6.45  lbreak........................................  53
X    6.46  lgets.........................................  53
X    6.47  logevent......................................  53
X    6.48  lookfor.......................................  54
X    6.49  mkvar.........................................  54
X          6.49.1  Variable Names........................  55
X          6.49.2  Variable Life and    Scope...............  55
X          6.49.3  String Variable Size..................  55
X    6.50  nap...........................................  56
X    6.51  nice..........................................  56
X    6.52  parity........................................  56
X    6.53  pclose........................................  57
X    6.54  plog..........................................  57
X    6.55  popd..........................................  58
X
X
X
X                  -    iii -
X
X
X
X
X
X
X
X
X
X
X
X    6.56  popen.........................................  58
X    6.57  prompt........................................  59
X    6.58  ptrace........................................  59
X    6.59  pushd.........................................  60
X    6.60  putf..........................................  60
X    6.61  return........................................  60
X    6.62  rk............................................  61
X    6.63  rlog..........................................  62
X    6.64  rname.........................................  62
X    6.65  rs............................................  62
X    6.66  rtscts........................................  63
X    6.67  rx............................................  64
X    6.68  ry............................................  64
X    6.69  rz............................................  64
X    6.70  scrdump.......................................  65
X    6.71  send..........................................  65
X    6.72  set...........................................  65
X    6.73  setline.......................................  66
X    6.74  sk............................................  66
X    6.75  ss............................................  67
X    6.76  sx............................................  67
X    6.77  sy............................................  68
X    6.78  system........................................  68
X    6.79  sz............................................  69
X    6.80  vidcolor......................................  70
X    6.81  vidnorm.......................................  70
X    6.82  vidrev........................................  71
X    6.83  whilei........................................  71
X    6.84  whiles........................................  71
X    6.85  xon...........................................  72
X
X    7.    Special    Procedures..................................  73
X    7.1   _rc.ep........................................  73
X    7.2   _connect.ep...................................  74
X    7.3   _connfail.ep..................................  75
X    7.4   _hangup.ep....................................  76
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X                   - iv -
X
X
X
X
SHAR_EOF
echo 'File doc/proc.man is complete' &&
chmod 0644 doc/proc.man ||
echo 'restore of doc/proc.man failed'
Wc_c="`wc -c < 'doc/proc.man'`"
test 117987 -eq "$Wc_c" ||
    echo 'doc/proc.man: original size 117987, current size' "$Wc_c"
rm -f _shar_wnt_.tmp
fi
rm -f _shar_seq_.tmp
echo You have unpacked the last part
exit 0

exit 0 # Just in case...