home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!sun-barr!ames!nsisrv!news2!joel
- From: joel@skater.GSFC.NASA.Gov ("Joel K. Gallun")
- Newsgroups: comp.protocols.tcp-ip
- Subject: Problem with NCSA Telnet and Orchid SVGA
- Message-ID: <JOEL.92Sep9124334@skater.GSFC.NASA.Gov>
- Date: 9 Sep 92 17:43:34 GMT
- Sender: usenet@nsisrv.gsfc.nasa.gov (Usenet)
- Distribution: comp
- Organization: Goddard Space Flight Center, Greenbelt, Md, USA
- Lines: 31
- Nntp-Posting-Host: skater.gsfc.nasa.gov
-
- Hi,
-
- I have been using NCSA Telnet for some time with great success. It is
- an excellent package.
-
- However, I recently upgraded my video controller to an Orchid ProDesigner
- IIs with 512K VRAM and I started having a problem. When I exit from
- Telnet, the screen goes blank and stays that way until I give the 3
- finger salute.
-
- I have tried setting the CONFIG.TEL option to use BIOS with no change
- in the symptoms. Here are the details:
-
- Compaq deskpro 386/20
- 4 Meg RAM
- NEC Multisync 3/D monitor
- DOS 5.0
- 3COM 3C503 ethernet card + packet driver using
- interrupt 0x7e
- No drivers or TSRs loaded
- NCSA Telnet 2.3
-
- I can provide my AUTOEXEC, CONFIG.SYS and CONFIG.TEL to anyone thinks
- that they might contain a clue as to what the problem might be.
-
- Anyone have any ideas or sympathy?
-
- --
- Joel Gallun Internet: nnjkg@robots.gsfc.nasa.gov
- NASA Goddard Space Flight Center Voice: (301) 805-4545
- #include <std_disclaimer> Snail: Code 735, GSFC, Greenbelt MD 20771
-