home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!olivea!spool.mu.edu!agate!ucbvax!UNODE1.NSWC.NAVY.MIL!SYSTEM_JM
- From: SYSTEM_JM@UNODE1.NSWC.NAVY.MIL ("SYSTEM SUPPORT")
- Newsgroups: comp.os.vms
- Subject: Booting LAVC MVII from VAX 4 DSSI disk (Response)
- Message-ID: <9209091158.AA24612@ucbvax.Berkeley.EDU>
- Date: 9 Sep 92 12:48:00 GMT
- Sender: usenet@ucbvax.BERKELEY.EDU
- Organization: The Internet
- Lines: 21
-
- > Bob Boardman BOARDMAN@CANCER.UNM.EDU writes:
- > Now we're having problems trying to get a LAVC clustered MicroVax II to
- > boot. After we finally got the queue manager running on the RF73 system
- > disk, so that we could dismount & spin down the RA81's, attempting to boot
- > the LACV'ed MVII would start the 2...1...0 countdown, but it would hang
- > after the 2..., and decnet messages would spit out on the boot node - it
- > was still insisting on booting from the RA81!.
- > So, how do we get the MVII to see the new RF73 disks and boot from them?
-
- It sounds like you need to run cluster_config.com on your cluster. Try deleting
- the old satellite first and then re-add it with the new disk information.
-
- Good Luck...
-
- *****************************************************************************
- ** Jim Matthews Internet: SYSTEM_JM@UNODE2.NSWC.NAVY.MIL **
- ** Naval Surface Warfare Center **
- ** Dahlgren Division (NSWCDD) **
- ** Dahlgren, VA 22448-5000 **
- ** Disclaimer: My opinions do not reflect the opinions of my employer **
- *****************************************************************************
-