home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.networking
- Path: sparky!uunet!gumby!destroyer!news.iastate.edu!isucard.card.iastate.edu!MLONG
- From: MLONG@isucard.card.iastate.edu
- Subject: Re: IBM LAN SERVER 3.0 beta problem
- Message-ID: <16863972F.MLONG@isucard.card.iastate.edu>
- Sender: news@news.iastate.edu (USENET News System)
- Organization: CARD
- References: <1992Sep9.174412.1309@hermes.dlogics.com>
- Date: Tue, 15 Sep 1992 16:44:58 GMT
- Lines: 23
-
- In article <1992Sep9.174412.1309@hermes.dlogics.com>
- ssc@hermes.dlogics.com writes:
-
- >I am currently testing IBM LANSERVER beta 3.0. It provides a virtual
- >LAN device driver which suppose to allows inititate of network connections
- >via os/2 winos2 or DOS mode. I was able to initiate network connections
- >in os/2 DOS mode but not winos2 mode. Dose any one or is there any
- >software out there that will allows me to initiate a network connection via
- >OS/2 winos2 mode? thanks.
- >
- If you are talking about the Virtual NETBIOS and the Virtual 802.2 interfaces,
- they should work in both the WINOS2 and DOS sessions. I have used both succesf
- ully.
-
- If you are talking about theVirtual DOS LAN Requester API support withouthaving
- to load DOS LAN Requester in a DOS box, that support is there for theDOS boxes
- only, not for WINOS2. This is a limitation of the Beta only, DLR API should
- be there for WINOS2 at final release.Also for this support did you place the
- new fixed DOSKRNL file in your d:\OS2\MDOS directory. It comes on a seperate
- disk, and must be installed manaully..
-
- Mike Long
- Iowa State University
-