home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!wupost!waikato.ac.nz!comp.vuw.ac.nz!actrix!lancea!lance
- Newsgroups: comp.os.os2.networking
- Subject: Re: UUPC 1.11q + SNEWS/2 2.0 setup problem.
- Message-ID: <715852936snx@lancea.actrix.gen.nz>
- From: lance@lancea.actrix.gen.nz (Lance Andrewes)
- Date: Mon, 07 Sep 92 08:02:16 GMT
- References: <1992Sep6.190119.17580@polaris.utu.fi>
- Distribution: world
- Organization: none
- Lines: 25
-
- karmat@polaris.utu.fi writes in article <1992Sep6.190119.17580@polaris.utu.fi>:
- >
- > I grapped UUPC 1.11q and SNEWS/2 2.0 from ftp-os2.nmsu.edu a while ago.
- > So far I have managed to set up UUPC. It is the new SNEWS which
- > makes me wonder....
- >
- > Every time I try to 'addgroup xxx' I get the following message:
- >
- > ADDGROUP: (SNEWS /2 2.0)
- >
- > Couldn't read rc info
-
- You may be missing an item from your UUPC.RC. I had this problem
- with an early OS/2 port, and found I had to specify an Organisation.
- Since my system has worked fine since, I haven't checked the code
- to see if it is still fussy. The relevant checks were in source
- file ACTIVE.C. If it didn't find _all_ 11 items, it bombed out
- with the error message you get (or a very similar one).
-
- Good luck. I might add that this port from Kai Uwe Rommel is
- very good. He's made it heaps faster than the original, and it
- is considerably improved in other ways.
- __
- _______ Email: lance@lancea.actrix.gen.nz
- //// ZL2AJH Wellington, New Zealand
-