NetNews Usenet Archive 1992 #20

home *** CD-ROM | disk | FTP | other *** search

/ NetNews Usenet Archive 1992 #20 / NN_1992_20.iso / spool / comp / os / msdos / programm / 9143 < prev next >

Wrap

Text File | 1992-09-08 | 31.6 KB | 705 lines

Newsgroups: comp.os.msdos.programmer Path: sparky!uunet!spool.mu.edu!agate!usenet.ins.cwru.edu!ncoast!brown From: brown@NCoast.ORG (Stan Brown) Subject: comp.os.msdos.programmer FAQ part 3 of 4 (REPOST) Expires: Tue, 22 Sep 1992 23:19:34 GMT Organization: Oak Road Systems, Cleveland Ohio USA Date: Mon, 7 Sep 1992 23:19:34 GMT Message-ID: <Bu8E4M.4uM@NCoast.ORG> Followup-To: poster References: <1992Sep07.msdos.faq.1bis@NCoast.ORG> Supersedes: <1992Sep07.msdos.faq.3bis@NCoast.ORG> Lines: 691 Last-modified: 22 August 1992 (continued from part 2) (no warranty on the code or information) If the posting date is more than six weeks in the past, see instructions in the last part of this list for how to get an updated copy. Copyright (C) 1992 Stan Brown, Oak Road Systems section 4. Disks and files =========================== Q401. What drive was the PC booted from? Under DOS 4.0 or later, load 3305 hex into AX; do an INT 21. DL is returned with an integer indicating the boot drive (1=A:, etc.). Q402. Which real and virtual disk drives are valid? Use INT 21 function 29 (parse filename). Point DS:SI at a null- terminated ASCII string that contains the drive letter and a colon, point ES:DI at a 37-byte dummy FCB buffer, set AX to 2900h, and do an INT 21. On return, AL is FF if the drive is invalid, something else if the drive is valid. RAM disks and SUBSTed drives are considered valid. Unfortunately, the b: drive is considered valid even on a single- diskette system. You can check that special case by interrogating the BIOS equipment byte at 0040:0010. Bits 7-6 contain the one less than the number of diskette drives, so if those bits are zero you know that b: is an invalid drive even though function 29 says it's valid. Following is some code originally posted by Doug Dougherty, with my fix for the b: special case, tested in Borland C++ 2.0 small model: #include <dos.h> void drvlist(void) { char *s = "A:", fcb_buff[37]; int valid; for ( ; *s<='Z'; (*s)++) { _SI = (unsigned) s; _DI = (unsigned) fcb_buff; _ES = _DS; _AX = 0x2900; geninterrupt(0x21); valid = _AL != 0xFF; if (*s == 'B' && valid) { char far *equipbyte = (char far *)0x00400010UL; valid = (*equipbyte & (3 << 6)) != 0; } printf("Drive '%s' is %sa valid drive.\n", s, valid ? "" : "not "); } } Q403. How can I make my single floppy drive both a: and b:? Under any DOS since DOS 2.0, you can put the command assign b=a into your AUTOEXEC.BAT file. Then, when you type "DIR B:" you'll no longer get the annoying prompt to insert diskette B (and the even more annoying prompt to insert A the next time you type "DIR A:"). You may be wondering why anybody would want to do this. Suppose you use two different machines, maybe one at home and one at work. One of them has only a 3.5" diskette drive; the other machine has two drives, and b: is the 3.5" one. You're bound to type "dir b:" on the first one, and get the nuisance message Insert diskette for drive B: and press any key when ready. But if you assign drive b: to point to a:, you avoid this problem. Caution: there are a few commands, such as DISKCOPY, that will not work right on ASSIGNed or SUBSTed drives. See the DOS manual for the full list. Before typing one of those commands, be sure to turn off the mapping by typing "assign" without arguments. The DOS 5.0 manual says that ASSIGN is obsolete, and recommends the equivalent form of SUBST: "subst b: a:\". Unfortunately, if this command is executed when a: doesn't hold a diskette, the command fails. ASSIGN doesn't have this problem. Q404. Why won't my C program open a file with a path? You've probably got something like the following code: char *filename = "c:\foo\bar\mumble.dat"; . . . fopen(filename, "r"); The problem is that \f is a form feed, \b is a backspace, and \m is m. Whenever you want a backslash in a string constant in C, you must use two backslashes: char *filename = "c:\\foo\\bar\\mumble.dat"; This is a feature of every C compiler, because Dennis Ritchie designed C this way. It's a problem only on MS-DOS systems, because only DOS (and Atari ST/TT running TOS, I'm told) uses the backslash in directory paths. But even in DOS this backslash convention applies _only_ to string constants in your source code. For file and keyboard input at run time, \ is just a normal character, so users of your program would type in file specs at run time the same way as in DOS commands, with single backslashes. Another possibility is to code all paths in source programs with / rather than \ characters: char *filename = "c:/foo/bar/mumble.dat"; Ralf Brown writes that "All versions of the DOS kernel accept either forward or backslashes as directory separators. I tend to use this form more frequently than backslashes since it is easier to type and read." This applies to DOS function calls (and therefore to calls to the file library of every programming language), but not to DOS commands. Q405. How can I redirect printer output to a file? My personal favorite utility for this purpose is PRN2FILE from {PC Magazine}, available from Simtel as PD1:<MSDOS.PRINTER>PRN2FILE.ARC, 14451 bytes including .ASM source, or from garbo as prn2file.zip in /pc/printer. ({PC Magazine} has given copies away as part of its utilities disks, so you may already have a copy.) The other listings that I found in Simtel's index as of mid-January 1992 are, from newest to oldest: PD1:<MSDOS.PRINTER> PRIND25.ZIP 17008 900420 Redirect printer to file/screen/printer RPRN.ARC 2631 900120 Redirect printer output to disk file PRINDIR.ARC 6836 891210 Redirects printer output to disk file VPRNT301.ARC 15259 891030 Printer redirection to disk file, v3.01 PSTASH20.ARC 2830 890216 Redirects lpt output to file PRNDSK.ARC 27172 871224 Redirect Printer Output To Disk LPTX600.ARC 31596 870319 Redirect printer output to a file At garbo, in the /pc/printer directory, you can find lamneth.zip PrintScreen redirect to a disk file v09-Mar-88 lptx.zip Redirect printer output v6.0 lptx700.zip Redirect printer output v7.0 (not update, just different) prindir8.zip Printer and port Redirection from Allen Creations Q406. What's the format of an .EXE header? See pages 349-350 of {PC Magazine}'s June 30, 1992 issue (xi:12) for the old and new formats. For a more detailed layout, look under INT 21 function 4B in Ralf Brown's interrupt list. Q407. How can my program open more files than DOS's limit of 20? (This is a summary of an article Ralf Brown posted on 8 August 1992.) There are separate limits on files and file handles. For example, DOS opens three files but five file handles: CON (stdin, stdout, and stderr), AUX (stdaux), and PRN (stdprn). The limit in FILES= in CONFIG.SYS is a system-wide limit on files opened by all programs (including the three that DOS opens and any opened by TSRs); each process has a limit of 20 handles (including the five that DOS opens). Example: CONFIG.SYS has FILES=40. Then program #1 will be able to open 15 file handles. Assuming that the program actually does open 15 handles pointing to 15 different files, other programs could still open a total of 22 files (40-3-15 = 22), though no one program could open more than 15 file handles. If you're running DOS 3.3 or later, you can increase the per-process limit of 20 file handles by a call to INT 21 function 67, Set Handle Count. Your program is still limited by the system-wide limit on open files, so you may also need to increase the FILES= value in your CONFIG.SYS file (and reboot). The run-time library that you're using may have a fixed-size table of file handles, so you may also need to get source code for the module that contains the table, increase the table size, and recompile it. section 5. Serial ports (COM ports) =================================== Q501. How do I set my machine up to use COM3 and COM4? Unless your machine is fairly old, it's probably already set up. After installing the board that contains the extra COM port(s), check the I/O addresses in word 0040:0004 or 0040:0006. (In DEBUG, type "D 40:4 L4" and remember that every word is displayed low byte first, so if you see "03 56" the word is 5603.) If those addresses are nonzero, your PC is ready to use the ports and you don't need the rest of this answer. If the I/O address words in the 0040 segment are zero after you've installed the I/O board, you need some code to store these values into the BIOS data segment: 0040:0004 word I/O address of COM3 0040:0006 word I/O address of COM4 0040:0011 byte (bits 3-1): number of serial ports installed The documentation with your I/O board should tell you the port addresses. When you know the proper port addresses, you can add code to your program to store them and the number of serial ports into the BIOS data area before you open communications. Or you can use DEBUG to create a little program to include in your AUTOEXEC.BAT file, using this script: n SET_ADDR.COM <--- or a different name ending in .COM a 100 mov AX,0040 mov DS,AX mov wo [0004],aaaa <--- replace aaaa with COM3 address or 0 mov wo [0006],ffff <--- replace ffff with COM4 address or 0 and by [0011],f1 or by [0011],8 <--- use number of serial ports times 2 mov AH,0 int 21 <--- this line must be blank rCX 1f rBX 0 w q Q502. How do I find the I/O address of a COM port? Look in the four words beginning at 0040:0000 for COM1 through COM4. (The DEBUG command "D 40:0 L8" will do this. Remember that words are stored and displayed low byte first, so a word value of 03F8 will be displayed as F8 03.) If the value is zero, that COM port is not installed (or you've got an old BIOS; see the preceding Q). If the value is nonzero, it is the I/O address of the transmit/receive register for the COM port. Each COM port occupies eight consecutive I/O addresses (though only seven are used by many chips). Here's some C code (tested under MSC 5.0 and BC++ 2.0) to find the I/O address: unsigned ptSel(unsigned comport) { unsigned io_addr; if (comport >= 1 && comport <= 4) { unsigned far *com_addr = (unsigned far *)0x00400000UL; io_addr = com_addr[comport-1]; } else io_addr = 0; return io_addr; } Q503. But aren't the COM ports always at I/O addresses 3F8, 2F8, 3E8, and 2E8? The first two are usually right (though not always); the last two are different on many machines. Q504. How do I configure a COM port and use it to transmit data? After hearing several recommendations, I looked at Joe Campbell's {C Programmer's Guide to Serial Communications}, ISBN 0-672-22584-0, and agree that it is excellent. He gives complete details on how serial ports work, along with complete programs for doing polled or interrupt-driver I/O. The book is quite thick, and none of it looks like filler. If Campbell's book is overkill for you, you'll find a good short description of serial I/O in {DOS 5: A Developer's Guide}, ISBN 1-55851-177-6, by Al Williams. section 6. Other hardware questions and problems ================================================ Q601. Which 80x86 CPU is running my program? According to an article posted by Michael Davidson, Intel's approved code for distinguishing among 8086, 80286, 80386, and 80486 and for detecting the presence of an 80287 or 80387 is published in the Intel's 486SX processor manual (order number 240950-001). You can download David Kirschbaum's improved version of this from Simtel as PD1:<MSDOS.SYSUTL>CPUID593.ZIP. According to an article posted by its author, WCPU041.ZIP knows the differences between DX and SX varieties of 386 and 486 chips, and can also detect a math coprocessor. It's in PD1:<MSDOS.SYSUTL> at Simtel. Q602. How can a C program send control codes to my printer? If you just fprintf(stdprn, ...), C will translate some of your control codes. The way around this is to reopen the printer in binary mode: prn = fopen("PRN", "wb"); You must use a different file handle because stdprn isn't an lvalue. By the way, PRN or LPT1 must not be followed by a colon in DOS 5.0. There's one special case, Ctrl-Z (ASCII 26), the DOS end-of-file character. If you try to send an ASCII 26 to your printer, DOS simply ignores it. To get around this, you need to reset the printer from "cooked" to "raw" mode. Microsoft C users must use int 21 function 44, "get/set device information". Turbo C and Borland C++ users can use ioctl to accomplish the same thing: ioctl(fileno(prn), 1, ioctl(fileno(prn),0) & 0xFF | 0x20, 0); An alternative approach is simply to write the printer output into a disk file, then copy the file to the printer with the /B switch. A third approach is to bypass DOS functions entirely and use the BIOS printer functions at INT 17. If you also fprintf(stdprn,...) in the same program, you'll need to use fflush( ) to synchronize fprintf( )'s buffered output with the BIOS's unbuffered. By the way, if you've opened the printer in binary mode from a C program, remember that outgoing \n won't be translated to carriage return/line feed. Depending on your printer, you may need to send explicit \n\r sequences. Q603. How can I redirect printer output to a file? Please see section 4, "Disks and files", for the answer. Q604. Which video adapter is installed? This technique should work if your BIOS is not too old. It uses three functions from INT 10, the BIOS video interrupt. Set AH=12h, AL=0, BL=32h; INT 10h. If AL is 12h, you have a VGA. If not, set AH=12h, BL=10h; INT 10h. If BL is 0,1,2,3, you have an EGA with 64,128,192,256K memory. If not, set AH=0Fh; INT 10h. If AL is 7, you have an MDA (original monochrome adapter) or Hercules; if not, you have a CGA. I've tested this for my VGA and got the right answer; but I can't test it for the other equipment types. Please let me know by email at brown@ncoast.org if your results vary. Q605. How do I switch to 43- or 50-line mode? Download PD1:<MSDOS.SCREEN>VIDMODE.ZIP, 4412 bytes, from Simtel or one of the mirror sites. It contains .COM utilities and .ASM source code. Q606. How can I find the Microsoft mouse position and button status? Use INT 33 function 3, described in Ralf Brown's interrupt list. The Windows manual says that the Logitech mouse is compatible with the Microsoft one, so I assume the interrupt will work the same. Also, see the directory PD1:<MSDOS.MOUSE> at Simtel. Q607. How can I access a specific address in the PC's memory? First check the library that came with your compiler. Many vendors have some variant of peek and poke functions; in Turbo Pascal use the pseudo-arrays Mem, MemW, and MemL. As an alternative, you can construct a far pointer: use Ptr in Turbo Pascal, MK_FP in the Turbo C family, and FP_OFF and FP_SEG in Microsoft C. Caution: Turbo C and Turbo C++ also have FP_OFF and FP_SEG macros, but they can't be used to construct a pointer. In Borland C++ those macros work the same as in Microsoft C, but MK_FP is easier to use. By the way, it's not useful to talk about "portable" ways to do this. Any operation that is tied to a specific memory address is not likely to work on another kind of machine. Q608. How can I read or write my PC's CMOS memory? There are a great many public-domain utilities that do this. These were available for download from Simtel as of 31 March 1992: PD1:<MSDOS.AT> CMOS13.ZIP 7258 920330 Backup and restore damaged CMOS memory CMOSER11.ZIP 28323 910721 386/286 enhanced CMOS setup program CMOSRAM.ZIP 76096 920214 Save AT/386/486 CMOS data to file and restore ROM2.ARC 20497 900131 Save AT and 386 CMOS data to file and restore SETUP21.ARC 24888 880613 Setup program which modifies CMOS RAM VIEWCMOS.ARC 15374 900225 Display contents of AT CMOS RAM, w/C source At garbo, /pc/ts/tsutle17.zip contains a CMOS program to check and display CMOS memory, but not to write to it. I have heard good reports of CMOS299.ZIP, available in the pc.dir directory of cantva.canterbury.ac.nz [132.181.30.3]. Of the above, my only experience is with CMOSRAM, which seems to work fine. It contains an excellent (and witty) .DOC file that explains the hardware involved and gives specific recommendations for preventing disaster or recovering from it. It's $5 shareware. Robert Jourdain's {Programmer's Problem Solver for the IBM PC, XT, and AT} has code for accessing the CMOS RAM, according to an article posted in this newsgroup. section 7. Other software questions and problems ================================================ Q701. How can a program reboot my PC? You can generate a "cold" boot or a "warm" boot. A cold boot is the same as turning the power off and on; a warm boot is the same as Ctrl-Alt-Del and skips the power-on self test. For a warm boot, store the hex value 1234 in the word at 0040:0072. For a cold boot, store 0 in that word. Then, if you want to live dangerously, jump to address FFFF:0000. Here's C code to do it (tested under MSC 5.0 and BC++ 2.0): void bootme(int want_warm) /* arg 0 = cold boot, 1 = warm */ { void (far* boot)(void) = (void (far*)(void))0xFFFF0000UL; unsigned far* type = (unsigned far*)0x00400072UL; *type = (want_warm ? 0x1234 : 0); (*boot)( ); } What's wrong with that method? It will boot right away, without closing files, flushing disk caches, etc. If you boot without flushing a write-behind disk cache (if one is running), you could lose data or even trash your hard drive. There are two methods of signaling the cache to flush its buffers: (1) simulate a keyboard Ctrl-Alt-Del in the keystroke translation function of the BIOS (INT 15 function 4F), and (2) issue a disk reset (DOS function 0D). Most disk-cache programs hook one or both of those interrupts, so if you use both methods you'll probably be safe. When user code simulates a Ctrl-Alt-Del, one or more of the programs that have hooked INT 15 function 4F can ask that the key be ignored by clearing the carry flag. For example, HyperDisk does this when it has started but not finished a cache flush. So if the carry flag comes back cleared, the boot code has to wait a couple of cluck ticks and then try again. (None of this matters on older machines whose BIOS can't support 101- or 102-key keyboards; see "What is the SysRq key for?" in section 3, "Keyboard".) Here's C code that tries to signal the disk cache (if any) to flush (compiles under MSC 5.0 and BC++ 2.0): #include <dos.h> void bootme(int want_warm) /* arg 0 = cold boot, 1 = warm */ { union REGS reg; void (far* boot)(void) = (void (far*)(void))0xFFFF0000UL; unsigned far* boottype = (unsigned far*)0x00400072UL; char far* shiftstate = (char far*)0x00400017UL; unsigned ticks; int time_to_waste; /* Simulate reception of Ctrl-Alt-Del: */ for (;;) { *shiftstate |= 0x0C; /* turn on Ctrl & Alt */ reg.x.ax = 0x4F53; /* 0x53 = Del's scan code */ reg.x.cflag = 1; /* sentinel for ignoring key */ int86(0x15, ®, ®); /* If carry flag is still set, we've finished. */ if (reg.x.cflag) break; /* Else waste some time before trying again: */ reg.h.ah = 0; int86(0x1A, ®, ®);/* system time into CX:DX */ ticks = reg.x.dx; for (time_to_waste = 3; time_to_waste > 0; ) { reg.h.ah = 0; int86(0x1A, ®, ®); if (ticks != reg.x.dx) ticks = reg.x.dx , --time_to_waste; } } /* Issue a DOS disk reset request: */ reg.h.ah = 0x0D; int86(0x21, ®, ®); /* Set boot type and boot: */ *boottype = (want_warm ? 0x1234 : 0); (*boot)( ); } Q702. How can I time events with finer resolution than the system clock's 55 ms (about 18 ticks a second)? The following files can be downloaded from Simtel: PD1:<MSDOS.AT> ATIM.ARC 5946 881126 Precision program timing for AT PD1:<MSDOS.C> MILLISEC.ZIP 37734 911205 MSC/asm src for millisecond res timing MSCHRT3.ZIP 53708 910605 High-res timer toolbox for MSC 5.1 MSEC_12.ZIP 8484 920320 High-def millisec timer v1.2 (C,ASM) PD1:<MSDOS.TURBO-C> TCHRT3.ZIP 53436 910606 High-res timer toolbox for Turbo C 2.0 TCTIMER.ARC 20087 891030 High-res timing of events for Turbo C ZTIMER11.ZIP 74477 920428 Time C/C++/Pascal/ASM-microsec accuracy PD1:<MSDOS.TURBOPAS> BONUS507.ARC 150435 900205 [Turbo Pascal source: high-res timing] Pascal users can download source code in /pc/turbopas/bonus507.zip at garbo. Q703. How can I find the error level of the previous program? First, which previous program are you talking about? If your current program ran another one, when the child program ends its error level is available to the program that spawned it. Most high-level languages provide a way to do this; for instance, in Turbo Pascal it's Lo(DosExitCode) and the high byte gives the way in which the child terminated. In Microsoft C, the exit code of a synchronous child process is the return value of the spawn-typoe function that creates the process. If your language doesn't have a function to return the error code of a child process, you can use INT 21 function 4D (get return code). By the way, this will tell you the child's exit code and the manner of its ending (normal, Ctrl-C, critical error, or TSR). It's much trickier if the current program wants to get the error level of the program that ran and finished before this one started. G.A.Theall has published source and compiled code to do this; you can download it from Simtel as PD1:<MSDOS.BATUTL>ERRLVL12.ZIP. (The code uses undocumented features in DOS 3.3 through 5.0. Theall says in the .DOC file that the values returned under 4DOS or other replacements won't be right.) Q704. How can a program set DOS environment variables? Program functions that read or write "the environment" typically access only the program's copy of the environment. What this Q really wants to do is to modify the active environment, the one that is affected by SET commands in batch files or at the DOS prompt. You need to do some programming to find the active environment, and that programming varies for different versions of DOS. A fairly well-written article in {PC Magazine} volume 8 number 20 (1989 Nov 28), pages 309-314, explains how to find the active environment, and includes Pascal source code. The article hints at how to change the environment, and suggests creating paths longer than 128 characters as one application. In searching Simtel for source code, I found many possibilities. I liked PD1:<MSDOS.SYSUTL>RBSETNV1.ZIP of the ones I looked at (not all of them). It includes some utilities to manipulate the environ- ment, with source code in C. Q705. How can I change the switch character to - from /? Under DOS 5.0, you can't. Earlier DOS versions let you change the "switch character" that introduces command-line options by using SWITCHAR= in CONFIG.SYS or by calling a DOS function. Then you would type "DIR -P" rather than "DIR /P". Not only did this make DOS look more like Unix (oooo!), but you could type / rather than \ in directory names. Under DOS 5.0, all this has changed. The DOS 5.0 commands hard-code / as the switch character. I've seen several reports that programs to change the switch character stopped working under DOS 5.0. Programs like SLASH.ZIP claim to change the switch character from / to something else. They do, but the change affects only the third-party programs that query the switch character via INT 21 function 3700. DOS internal commands and most MS-DOS external commands will still use /. (DOS replacements like 4DOS may honor the switch character for internal commands.) Q706. Why does my interrupt function behave strangely? Interrupt service routines can be tricky, because you have to do some things differently from "normal" programs. If you make a mistake, debugging is a pain because the symptoms may not point at what's wrong. Your machine may lock up or behave erratically, or just about anything else can happen. Here are some things to look for. (See the next Q for general help before you have a problem.) First, did you fail to set up the registers at the start of your routine? When your routine begins executing, you can count on having CS point to your code segment and SS:SP point to some valid stack (of unknown length), and that's it. In particular, an interrupt service routine must set DS to DGROUP before accessing any data in its data segments. (If you're writing in a high-level language, the compiler may generate this code for you automatically; check your compiler manual. For instance, in Borland and Microsoft C, give your function the "interrupt" attribute.) Did you remember to turn off stack checking when compiling your interrupt server and any functions it calls? The stack during the interrupt is not where the stack-checking code expects it to be. (Caution: Some third-party libraries have stack checking compiled in, so you can't call them from your interrupt service routine.) Next, are you calling any DOS functions (INT 21, 25, or 26) in your routine? DOS is not re-entrant. This means that if your interrupt happens to be triggered while the CPU is executing a DOS function, calling another DOS function will wreak havoc. (Some DOS functions are fully re-entrant, as noted in Ralf Brown's interrupt list. Also, your program can test, in a way too complicated to present here, when it's safe to call non-re-entrant DOS functions. See INT 28 and functions 34, 5D06, 5D0B of INT 21. Your program must read both the "InDOS flag" and the "critical error flag".) Is a function in your language library causing trouble? Does it depend on some initializations done at program startup that is no longer available when the interrupt executes? Does it call DOS (see preceding paragraph)? For example, in both Borland and Microsoft C the memory-allocation functions (malloc, etc..) and standard I/O functions (scanf, printf) call DOS functions and also depend on setups that they can't get at from inside an interrupt. Many other library functions have the same problem, so you can't use them inside an interrupt function without special precautions. Is your routine simply taking too long? This can be a problem if you're hooking on to the timer interrupt, INT 1C or INT 8. Since that interrupt expects to be called 18.2 times a second, your routine -- plus any others hooked to the same interrupts -- must execute in less than 55 ms. If they use even a substantial fraction of that time, you'll see significant slowdowns of your foreground program. For a good writeup, download INTSHARE (from ni.funet.fi in pub/msdos/simtel20/info or from Simtel in PD1:<MSDOS.INFO>). Did you forget to restore all registers at the end of your routine? Did you chain improperly to the original interrupt? You need to restore the stack to the way it was upon entry to your routine, then do a far jump (not call) to the original interrupt service routine. (The process is a little different in high-level languages.) Q707. How can I write a TSR (terminate-stay-resident) utility? Several books can help you with this. - Ray Duncan's {Advanced MS-DOS}, ISBN 1-55615-157-8, gives a brief checklist intended for experienced programmers. The ISBN is for the second edition, through DOS 4; but check to see whether the DOS 5 version is available yet. - {DOS 5: A Developer's Guide} by Al Williams, ISBN 1-55851-177-6, goes into a little more detail, 90 pages worth! - Pascal programmers might look at {The Ultimate DOS Programmer's Manual} by John Mueller and Wallace Wang, ISBN 0-8306-3534-3, for an extended example in mixed Pascal and assembler. - For a pure assembler treatment, check Steven Holzner's {Advanced Assembly Language}, ISBN 0-13-663014-6. He has a book with the same title out from Brady Press, but it's about half as long as this one. - For C programmers, there's a chapter in Herbert Schildt's {The Art of C: Elegant Programming Solutions}. I haven't seen the book, but a posted article recommended it. You might want to download PD1:<MSDOS.ASMUTL>TEMPLATE.ZIP, 13161 bytes, from Simtel. It's Douglas Boling's MASM template for a TSR. In the same directory, AMISL083.ZIP, 45230 bytes, contains Ralf Brown's assembly-language implementation of the Alternate Multiplex Interrupt Specification, with utilities in C. Finally, there are commercial products, of which TesSeRact (for C-language TSRs) is one of the best known. Q708. How can I write a device driver? Many books answer this in detail. Among them are {Advanced MS-DOS} and {DOS 5: A Developer's Guide}, cited in the preceding Q. Michael Tischer's {PC System Programming}, ISBN 1-55755-036-0, has an extensive treatment, as does Dettman and Kyle's {DOS Programmer's Reference: 2d Edition}, ISBN 0-88022-458-4. For a really in-depth treatment, look for a specialized book like Robert Lai's {Writing MS-DOS Device Drivers}, ISBN 0-201-13185-4. Q709. What can I use to manage versions of software? In PD1:<MSDOS.PGMUTL> at Simtel you'll find RCS55.ZIP, 388K dated 18 Dec 1991. I haven't used it myself, but I understand this is a port of the Unix RCS utility, but is limited to one-character extensions on filenames (no .CPP). (continued in part 4) -- Stan Brown, Oak Road Systems brown@Ncoast.ORG "Never try to teach a pig to sing. You'll only waste your time and annoy the pig." Heinlein wrote it; I'd like to know the original source.