home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #19 / NN_1992_19.iso / spool / sci / electron / 14929 < prev    next >
Encoding:
Internet Message Format  |  1992-08-27  |  1.1 KB

  1. Path: sparky!uunet!sun-barr!cs.utexas.edu!uwm.edu!ogicse!reed!bob
  2. From: bob@reed.edu (Robert Ankeney)
  3. Newsgroups: sci.electronics
  4. Subject: SER 486 motherboard info needed
  5. Message-ID: <1992Aug27.230235.1170@reed.edu>
  6. Date: 27 Aug 92 23:02:35 GMT
  7. Article-I.D.: reed.1992Aug27.230235.1170
  8. Organization: Reed College, Portland, OR
  9. Lines: 16
  10.  
  11.  
  12.      I recently got a 486 motherboard at an auction, sans documentation.
  13. It has an attached memory board, with bank 0 on the left side and banks
  14. 1 and 2 on the right, with a 5-position DIP switch to configure it.
  15. The mother board has a 486 with a Chips & Technology chipset in the middle
  16. of the board.  Screened near the CPU is a note regarding CPU selection
  17. (JP2 CPU SELECT).  The board has a 4-chip AMI bios.  Other than that,
  18. there is no manufacturer's name other than the box it came in labelled
  19. "SER" on the top..  Also the motherboard has a part number 702440B and
  20. 35-2495-01 on it.
  21.      Does anyone have any info regarding this set?  Jumper info would
  22. be especially nice.  Schematic even nicer!  Or a number for someone who
  23. handles SER parts even?!
  24.  
  25.      Thanks for the info,
  26.      Robert
  27.