NetNews Usenet Archive 1992 #19/NN_1992_19.iso/spool/gnu/gcc/help/1986

Text File | 1992-08-25 | 35.7 KB | 865 lines

Newsgroups: gnu.gcc.help
Path: sparky!uunet!cis.ohio-state.edu!ai.mit.edu!tower
From: [e-mail] (Leonard H. Tower Jr.)
Subject: mailing list for gcc
Message-ID: <9208260529.AA06962@raisin-nut>
Sender: [e-mail]
Reply-To: [e-mail]
Organization: Project GNU, Free Software Foundation,
    675 Massachusetts Ave., Cambridge, MA  02139, USA   [phone]
References: <[e-mail]>
Distribution: gnu
Date: Wed, 26 Aug 1992 05:29:25 GMT
Lines: 850

   Received: from albert.gnu.ai.mit.edu by life.ai.mit.edu (4.1/AI-4.10) id AA16281; Tue, 28 Jul 92 21:24:19 EDT
   Received: from life.ai.mit.edu by albert.gnu.ai.mit.edu (5.65/4.0) with SMTP
       id <[e-mail]>; Tue, 28 Jul 92 21:24:17 -0400
   Received: by life.ai.mit.edu (4.1/AI-4.10) id AA15160; Mon, 27 Jul 92 21:28:20 EDT
   Return-Path: <[e-mail]>
   Received: from news.cis.ohio-state.edu by life.ai.mit.edu (4.1/AI-4.10) id AA15117; Mon, 27 Jul 92 21:27:35 EDT
   Received: by news.cis.ohio-state.edu (5.61-kk/5.911008)
       id AA15281; Mon, 27 Jul 92 21:10:40 -0400
   Received: from USENET by news.cis.ohio-state.edu with netnews
       for [e-mail] ([e-mail]);
       contact [e-mail] if you have
       questions.
   To: [e-mail]
   Date: 27 Jul 92 17:30:04 GMT
   Message-Id: <[e-mail]>
   Organization: solucorp
   From: solucor![e-mail] (Jacques Gelinas)
   Sender: [e-mail]
   Subject: mailing list for gcc
   Status: RO

       Is there a mailing list (or newsgroup) specific to GCC ?

   --

   -------------------------------------------------------- Jacques
   Gelinas ([e-mail]) Today it's my opinion

enjoy -len

Member of the League for Programming Freedom.
Ask <[e-mail]> via e-mail for information.
----------------------------------------------------------------------
     GNU Project Electronic Mailing Lists.  Last Updated 10 July 92

       Please report improvements to: [e-mail]

* GNU mailing lists are also distributed as USENET news groups

The mailing lists are gated both ways with the gnu.all newsgroups at
ohio-state.edu.  The one-to-one correspondence is indicated below.  If
you don't know if your site is on USENET, ask your system administrator.
If you are a USENET site and don't get the gnu.all newsgroups, please
ask your USENET administrator to get them.  If he has your feeds ask
their feeds, you should win.  And everyone else wins: newsgroups make
better use of the limited bandwidth of the computer networks and your
home machine than mailing list traffic; and staying off the mailing
lists make better use of the people who maintain the lists and the
machines that the GNU people working with rms use (i.e. we have more
time to produce code!!).  Thanx.

* Getting the mailing lists directly

If several users at your site or local network want to read a list and
you aren't a USENET site, Project GNU would prefer that you would set up
one address that redistributes locally.  This reduces overhead on our
people and machines, your gateway machine, and the network(s) used to
transport the mail from us to you.

* How to subscribe to and report bugs in mailing lists

Send messages ABOUT these lists, such as reports of mail problems, or
requests to be added or removed, to help-gnu-emacs-request (or
info-gnu-request, bug-gdb-request, etc.), NOT to info-gnu-emacs (or
info-gnu, etc.).  These <LIST_NAME>-request addresses go only to the
people who can do something about your requests or problems, and thus
avoids disturbing everyone else.

Note that all GNU mailing lists are maintained by volunteers.  They get
behind occasionally.  Wait at least 3 or 4 days before asking again.
Thanks!

Many of the GNU mailing lists are very large and are received by many
people.  Please don't send them anything that is not seriously important
to all their readers.  All GNU mailing lists are unmoderated, mail
reflectors, except info-gnu, info-gnu-emacs, info-gcc, info-g++,
info-gnu-chess, info-gnu-fortran and info-gnu-utils.

All addresses below are in internet format.  Consult the mail guru for
your computer to figure out address syntaxes from other networks.  From
UUCP machines:
    ..!ucbvax!prep.ai.mit.edu!ADDRESS
    ..!uunet!prep.ai.mit.edu!ADDRESS

If a message you mail to a list is returned from a MAILER-DAEMON (often
with the line:
      ----- Transcript of session follows -----
 don't resend the message to the list.  All this return means is that
your original message failed to reach a few addresses on the list.  Such
messages are NEVER a reason to resend a piece of mail a 2nd time.  This
just bothers all (less the few delivery failures (which will probably
just fail again!)) of the readers of the list with a message they have
already seen.  It also wastes computer and network resources.

It is appropriate to send these to the -request address for a list, and
ask them to check the problem out.

* Send Specific Requests for Information to: [e-mail]

Specific requests for information about obtaining GNU software, or GNU
activities in Cambridge and elsewhere can be directed to:
    [e-mail]

* General Information about all lists

Please keep each message under 25,000 characters.  Some mailers bounce
messages that are longer than this.  If your message is long, it is
generally better to send a message offering to make the large file
available to only those people who want it (e.g. mailing it to people
who ask, or putting it up for FTP).  In the case of gnu.emacs.sources,
somewhat larger postings (up to 10 parts of no more than 25,000
characters each) are acceptable (assuming they are likely to be of
interest to a reasonable number of people); if it's larger than that
have it added to archive.cis.ohio-state.edu (the GNU Emacs Lisp ftp and
uucp archive on and announce) its location there.  Good bug reports are
short.  See section '* General Information about bug-* lists and ...'
for further details.

Most of the time, when you reply to a message sent to a list, the reply
should not go to the list.  But most mail reading programs supply, by
default, all the recipients of the original as recipients of the reply.
Make a point of deleting the list address from the header when it does
not belong.  This prevents bothering all readers of a list, and reduces
network congestion.

The GNU mailing lists and newsgroups, like the GNU project itself, exist
to promote the freedom to share software.  So don't use these lists to
promote or recommend non-free software.  (Using them to post ordering
information is the ultimate faux pas.)  If there is no free program to
do a certain task, then somebody should write one!

* General Information about info-* lists

These lists and their newsgroups are meant for important announcements.
Since the GNU project uses software development as a means for social
change, the announcements may be technical or political.

Most GNU projects info-* lists (and their corresponding gnu.*.announce
newsgroups) are moderated to keep their content significant and
relevant.  If you have a bug to report, send it to the bug-* list.  If
you need help on something else and the help-* list exists, ask it.

See section '* General Information about all lists'.

* General Information about help-* lists

These lists (and their newsgroups) exist for anyone to ask questions
about the GNU software that the list deals with.  The lists are read by
people who are willing to take the time to help other users.

When you answer the questions that people ask on the help-* lists, keep
in mind that you shouldn't answer by promoting a proprietary program as
a solution.  The only real solutions are the ones all the readers can
share.

See section '* General Information about all lists'.

* General Information about bug-* lists and reporting program bugs

If you think something is a bug in a program, it might be one; or, it
might be a misunderstanding or even a feature.  Before beginning to
report bugs, please read the section ``Reporting Emacs Bugs'' toward the
end of the GNU Emacs reference manual (or node Emacs/Bugs in Emacs's
built-in Info system) for a discussion of how and when to send in bug
reports.  For GNU programs other than GNU Emacs, also consult their
documentation for their bug reporting procedures.  Always include the
version number of the GNU program, as well as the operating system and
machine the program was ran on (if the program doesn't have a version
number, send the date of the latest entry in the file ChangeLog).  For
GNU Emacs bugs, type "M-x emacs-version".  A debugger backtrace of any
core dump, can also be useful.  Be careful to separate out hypothesis
from fact!  For bugs in GNU Emacs lisp, set variable debug-on-error to
t, and re-enter the command(s) that cause the error message; Emacs will
pop up a debug buffer if something is wrong; please include a copy of
the buffer in your bug report.  Please also try to make your bug report
as short as possible; distill the problem to as few lines of code and/or
input as possible.  GNU maintainers give priority to the shortest, high
quality bug reports.

Please don't send in a patch without a test case to illustrate the
problem the patch is supposed to fix.  Sometimes the patches aren't
correct or aren't the best way to do the job, and without a test case
there is no way to debug an alternate fix.

The purpose of reporting a bug is to enable the bug to be fixed for the
sake of the whole community of users.  You may or may not receive a
response; the maintainers will send one if that helps them find or
verify a fix.  Most GNU maintainers are volunteers and all are
overworked; they don't have time to help individuals and still fix the
bugs and make the improvements that everyone wants.  If you want help
for yourself in particular, you may have to hire someone.  The GNU
project maintains a list of people providing such services.  It is
distributed with GNU Emacs in file etc/SERVICE, and can be requested
from [e-mail].

Anything addressed to the implementors and maintainers of a GNU program
via a bug-* list, should NOT be sent to the corresponding info-* or
help-* list.

Please DON'T post your bug reports on the gnu.* newsgroups!  Mail them
to bug-*@prep instead!  At first sight, it seems to make no difference:
anything sent to one will be propagated to the other; but if you post on
the newsgroup, the information about how to reach you is lost in the
message that goes on the mailing list.  It can be very important to know
how to reach you if there is anything in the bug report that we don't
understand.  Bug reports also reach the GNU maintainers quickest when
they are sent to the bug-* mailing list submittal address.

And please DON'T post your GNU bug reports to comp.* or other non gnu.*
newsgroups, they never make it to the GNU maintainers at all.  Please
mail them to bug-*@prep instead!

See section '* General Information about all lists'.

* [e-mail] to subscribe to info-gnu
** gnUSENET newsgroup: gnu.announce
** Send announcements to: [e-mail]

This list distributes progress reports on the GNU Project.  It is also
used by the GNU Project to ask people for various kinds of help.  It is
NOT for general discussion.

The list is filtered to remove items meant for info-gnu-request, that
can be answered by the moderator without bothering the list, or should
have been sent to another list.

See section '* General Information about info-* lists'.

* [e-mail] to subscribe to gnu-misc-discuss
** gnUSENET newsgroup: gnu.misc.discuss
** Send contributions to: [e-mail]

This list is for serious discussion of freed software, the GNU
Project, the GNU Manifesto and their implications.  It's THE place for
discussion that is not appropriate in the other GNU mailing lists and
gnUSENET newsgroups.

Flaming is out of place.  Tit-for-tat is not welcome.  Repetition
should not occur.

Good READING and writing are expected.  Before posting, wait a while,
cool off, and think.

Don't trust pronouncements made on gnu-misc-discuss about what GNU is,
what FSF position is, what the GNU General Public License is, etc.,
unless they are made by someone you know is well connected with GNU and
are sure the message is not forged.

USENET and gnUSENET readers are expected to have read ALL the articles
in news.announce.newusers before posting.  If news.announce.newusers is
empty at your site, wait (the articles are posted monthly), your posting
isn't that urgent!  Readers on the Internet can anonymous ftp these
articles from wsmr-simtel20.army.mil under directory
PD2:<UNIX-C.USENET>.

Someone from the Free Software Foundation will attempt to follow this
group as time and volume permits.

Remember, "GNUs Not Unix" and "gnUSENET is Not USENET".  We have
higher standards!

Note that sending technical questions about specific GNU software to
gnu-misc-discuss is likely to be less useful than sending them to the
appropriate mailing list or gnUSENET newsgroup, since more technical
people read those.

* [e-mail] to subscribe to bug-gnu-emacs
** gnUSENET newsgroup: gnu.emacs.bug
** Gnu Emacs bug reports to: [e-mail]

This list distributes, to the active maintainers of GNU Emacs, bug
reports and fixes for, and suggestions for improvements in GNU Emacs.

Send bugs in the GNU Emacs Lisp reference manual to:
    [e-mail]

lisp-manual-bugs is neither a mailing list nor a gnUSENET newsgroup.
It's just a bug-reporting address.

Subscribers to bug-gnu-emacs automatically receive all
info-gnu-emacs messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to gnu-emacs-sources
** gnUSENET newsgroup: gnu.emacs.sources
** Gnu Emacs source code to: [e-mail]

This list/newsgroup will be for the posting, by their authors, of lisp
and C sources and patches that improve GNU Emacs.  Its contents will
be reviewed by FSF for inclusion in future releases of GNU Emacs.

Please do NOT discuss or request source code here.  Use
help-gnu-emacs/gnu.emacs.help for those purposes.  This allows the
automatic archiving of sources posted to this list/newsgroup.

Please do NOT post such sources to any other GNU mailing list (e.g
help-gnu-emacs) or gnUSENET newsgroups (e.g. gnu.emacs.help).  It's up
to each poster to decide whether to cross-post to any non-gnUSENET
newsgroup (e.g. comp.emacs or vmsnet.sources).

Please do NOT announce that you have posted source code to
gnu.emacs.sources to any other GNU mailing list (e.g. help-gnu-emacs) or
gnUSENET newsgroups (e.g. gnu.emacs.help).  People who want to keep up
with sources will read this list/newsgroup.  It's up to each poster to
decide whether to announce a gnu.emacs.sources article in any
non-gnUSENET newsgroup (e.g comp.emacs or comp.sources.d).

If source or patches that were previously posted or a simple fix is
requested in help-gnu-emacs, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not by a broadcast medium that reaches thousands
of sites.

If the source is very long (>10k bytes) send mail offering to send it.
This prevents the requester from getting many redundant copies and saves
network bandwidth.

* [e-mail] to subscribe to help-gnu-emacs
** gnUSENET newsgroup: gnu.emacs.help    (and one-way into comp.emacs)
** Send contributions to: [e-mail]

This list is the place for users and installers of GNU Emacs to ask for
help.  Please send bug reports to bug-gnu-emacs instead of posting them
here.

Since help-gnu-emacs is a very large list, send it only those items that
are seriously important to many people.

If source or patches that were previously posted or a simple fix is
requested in help-gnu-emacs, please mail it to the requester.  Do NOT
repost it.  If you also want something that is requested, send mail to
the requester asking him to forward it to you.  This kind of traffic is
best handled by e-mail, not a broadcast medium that reaches thousands of
sites.

This list is also gated one way to USENET's newsgroup comp.emacs (once
known as net.emacs).  This one-way gating is done for users whose sites
get comp.emacs, but not gnu.emacs.help.  Users at non-USENET sites may
receive all articles from comp.emacs by making their request to:
[e-mail]

If Emacs crashes, or if you build Emacs following the standard procedure
on a system which Emacs is supposed to work on (see etc/MACHINES) and it
does not work at all, or if an editing command does not behave as it is
documented to behave, this is a bug.  Don't send bug reports to
help-gnu-emacs (gnu.emacs.help) or post them to comp.emacs; mail them to
[e-mail] instead.

See section '* General Information about help-* lists'.

* [e-mail] to subscribe to info-gnu-emacs
** gnUSENET newsgroup: gnu.emacs.announce    (and one-way into comp.emacs)
** Send announcements to: [e-mail]

This list distributes announcements and progress reports on GNU Emacs.
It is NOT for general discussion; please use help-gnu-emacs for that.

The list is filtered to remove items meant for info-gnu-emacs-request,
that can be answered by the moderator without bothering the list, or
should have been sent to another list.

info-gnu-emacs is also gated one way to USENET's newsgroup comp.emacs
(once known as net.emacs).  This one-way gating is done for users whose
sites get comp.emacs, but not gnu.emacs.announce.  Users at non-USENET
sites may receive all articles from comp.emacs by making their request
to: [e-mail]

Do not report GNU Emacs bugs to info-gnu-emacs or comp.emacs, instead
mail them to [e-mail].

See section '* General Information about info-* lists'.

* [e-mail] to subscribe to vms-gnu-emacs
** gnUSENET newsgroup: gnu.emacs.vms
** Send contributions to: [e-mail]
*** UUCP: ..!uunet!harvard!vms-gnu-emacs-request

This list was a working group who did the initial port of GNU Emacs to
the VMS operating system.  It still discusses problems and solutions to
the VMS port and the distribution of it.

* [e-mail] to subscribe to bug-bash
** gnUSENET newsgroup: gnu.bash.bug
** BASH bug reports to: [e-mail]

This list distributes, to the active maintainers of BASH (the Bourne
Again SHell), bug reports and fixes for, and suggestions for
improvements in BASH.

Always report the version number of the operating system, hardware, and
bash (flag -version on startup or check the variable $BASH_VERSION in a
running bash).

There are no other GNU mailing lists or gnUSENET newsgroups for BASH.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to bug-gdb
** gnUSENET newsgroup: gnu.gdb.bug
** GDB bug reports to: [e-mail]

This list distributes, to the active maintainers of GDB (Gnu's
DeBugger), bug reports and fixes for, and suggestions for improvements
in GDB.

There are no other GNU mailing lists or gnUSENET newsgroups for GDB.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to bug-gcc
** gnUSENET newsgroup: gnu.gcc.bug
** GCC bug reports to: [e-mail]

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in the GNU C Compiler to its active
developers.

Please don't send in a patch without a test case to illustrate the
problem the patch is supposed to fix.  Sometimes the patches aren't
correct or aren't the best way to do the job, and without a test case
there is no way to debug an alternate fix.

The most convenient form of test case is a piece of cpp output that can
be passed directly to cc1.  Preferably written in C, not C++.

Subscribers to bug-gcc automatically receive all info-gcc messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to help-gcc
** gnUSENET newsgroup: gnu.gcc.help
** Send contributions to: [e-mail]

This list is the place for users and installers of the GNU C Compiler to
ask for help.

If gcc crashes, or if you build gcc following the standard procedure on
a system which gcc is supposed to work on (see config.gcc) and it does
not work at all, or if an command line option does not behave as it is
documented to behave, this is a bug.  Don't send bug reports to help-gcc
(gnu.gcc.help); mail them to [e-mail] instead.

See section '* General Information about help-* lists'.

* [e-mail] to subscribe to info-gcc
** gnUSENET newsgroup: gnu.gcc.announce
** Send announcements to: [e-mail]

This list distributes announcements and progress reports on the GNU C
Compiler.  It is NOT for general discussion; please use help-gcc for
that.

The list is filtered to remove items meant for info-gcc-request, that
can be answered by the moderator without bothering the list, or should
have been sent to another list.

See section '* General Information about info-* lists'.

* [e-mail] to subscribe to bug-glibc
** gnUSENET newsgroup: gnu.glibc.bug
** GNU C Library bug reports to: [e-mail]

This list distributes, to the active maintainers of glibc (GNU's C
library), bug reports and fixes for, and suggestions for improvements in
glibc.

Announcements of new releases of glibc are made on both info-gcc and
bug-glibc.

There are no other GNU mailing lists or gnUSENET newsgroups for the GNU
C Library.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to bug-g++
** gnUSENET newsgroup: gnu.g++.bug
** G++ bug reports to: [e-mail]

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in the GNU C++ Compiler to its active
developers.

G++ uses the GNU C-Compiler back end.  Active developers may wish to
subscribe to [e-mail] as well.

Subscribers to bug-g++ automatically receive all info-g++ messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to help-g++
** gnUSENET newsgroup: gnu.g++.help    (and one-way into comp.lang.c++)
** Send contributions to: [e-mail]

This list is the place for users and installers of the GNU C++ Compiler
to ask for help.  Please send bug reports to [e-mail]
instead of posting them here.

help-g++ is also gated one way to USENET's newsgroup comp.lang.c++.
This one-way gating is done for users whose sites get comp.lang.c++, but
not gnu.g++.help.

If g++ crashes, or if you build g++ following the standard procedure on
a system which g++ is supposed to work on (see config.g++) and it does
not work at all, or if an command line option does not behave as it is
documented to behave, this is a bug.  Don't send bug reports to help-g++
(gnu.g++.help) or post them to comp.lang.c++; mail them to
[e-mail] instead.

See section '* General Information about help-* lists'.

* [e-mail] to subscribe to info-g++
** gnUSENET newsgroup: gnu.g++.announce    (and one-way into comp.lang.c++)
** Send announcements to: [e-mail]

This list distributes announcements and progress reports on the GNU C++
Compiler.  It is NOT for general discussion; please use help-g++ for
that.

The list is filtered to remove items meant for info-g++-request, that
can be answered by the moderator without bothering the list, or should
have been sent to another list.

It is also gated one way to USENET's newsgroup comp.lang.c++.  This
one-way gating is done for users whose sites get comp.lang.c++, but not
gnu.g++.announce.

Do not report g++ bugs to info-g++ or comp.lang.c++, mail them to
[e-mail] instead.

See section '* General Information about info-* lists'.

* [e-mail] to subscribe to bug-lib-g++
** gnUSENET newsgroup: gnu.g++.lib.bug
** lib-g++ bug reports to: [e-mail]

This list distributes, to the active maintainers of lib-g++ (GNU's
library for C++), bug reports and fixes for, and suggestions for
improvements in lib-g++.

Announcements of new releases of lib-g++ are made on both info-g++ and
bug-lib-g++.

There are no other GNU mailing lists or gnUSENET newsgroups for the G++
Library.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to info-gnu-fortran
** gnUSENET newsgroup: NONE YET
** Send announcements to: [e-mail]

This list is for progress reports about the GNU Fortran compiler.  In
the future it will also be used for release notices.

The list is filtered to remove items meant for info-gnu-fortran-request,
that can be answered by the moderator without bothering the list, or
should have been sent to another list.

See section '* General Information about info-* lists'.

There are no other GNU mailing lists or gnUSENET newsgroups for GNU
Fortran (yet).

* [e-mail] to subscribe to bug-gnu-smalltalk
** gnUSENET newsgroup: gnu.smalltalk.bug
** GNU Smalltalk bug reports to: [e-mail]

GNU Smalltalk is the GNU project implementation of the Smalltalk language.

This list distributes, to the active maintainers of GNU Smalltalk, bug
reports and fixes for, and suggestions for improvements to GNU
Smalltalk.

For now, new releases of GNU Smalltalk will also be announced on this list.

There are no other GNU mailing lists or gnUSENET newsgroups for GNU
Smalltalk.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to st-next
** gnUSENET newsgroup: NONE PLANNED
** Send contributions to: [e-mail]

For people interested in working on GNU Smalltalk on the NeXT.

* [e-mail] to subscribe to bug-groff
** gnUSENET newsgroup: gnu.groff.bug
** GNU groff bug reports to: [e-mail]

groff is the GNU project implementation, in C++, of the traditional
Unix document formatting tools.  As of June 1990 it includes troff,
pic, tbl, eqn, man macros, a PostScript driver, a driver which
produces TeX dvi format and a driver for typewriter-like devices.  A
modified version of the Berkeley me macros and an enhanced version of
the X11R4 xditview are also included.

This list distributes, to the active maintainers of groff, bug reports
and fixes for, and suggestions for improvements to groff (and it
component programs).

For now, new releases of groff will also be announced on this list.

There are no other GNU mailing lists or gnUSENET newsgroups for groff.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to bug-ghostscript
** gnUSENET newsgroup: gnu.ghostscript.bug
** Ghostscript bug reports to: [e-mail]

GhostScript is the GNU project implementation of a language and graphics
library with a remarkable similarity to PostScript.

This list distributes, to the active maintainers of Ghostscript, bug
reports and fixes for, and suggestions for improvements in Ghostscript.

For now, new releases of Ghostscript will also be announced on this list.

There are no other GNU mailing lists or gnUSENET newsgroups for
GhostScript.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to bug-gnu-chess
** gnUSENET newsgroup: gnu.chess.bug
** GNU Chess bug reports to: [e-mail]

This list directly accesses the GNU Chess developer's group.  If you
have a *BUG* to report about the program, which can also include a
feature enhancement request, please send it to this list.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to info-gnu-chess
** gnUSENET newsgroup: gnu.chess.announce
** Send contributions to: [e-mail]

This list is used for announcements about GNU Chess and related
programs, small but important patches, games played by people or other
entities against the program, and other generalized non-bug,
non-enhancement data.

The list is filtered to remove items meant for info-gnu-chess-request,
that can be answered by the moderator without bothering the list, or
should have been sent to another list.

See section '* General Information about info-* lists'.

* [e-mail] to subscribe to bug-gnu-utils
** gnUSENET newsgroup: gnu.utils.bug
** GNU Utilities bug reports to: [e-mail]

This list distributes, to the active maintainers of these programs, bug
reports and fixes for, and suggestions for improvements in GNU programs
not covered by other bug-* mailing lists/gnu.*.bug newsgroups.

Subscribers to bug-gnu-utils automatically receive all info-gnu-utils
messages.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to help-gnu-utils
** gnUSENET newsgroup: gnu.utils.help
** Send contributions to: [e-mail]

This list is the place for users and installers of GNU programs not
covered by other GNU mailing lists/gnu.* newsgroups to ask for help.

Don't send bug reports to help-gnu-utils (gnu.utils.help); mail them to
[e-mail] instead.

See section '* General Information about help-* lists'.

* [e-mail] to subscribe to info-gnu-utils
** gnUSENET newsgroup: gnu.utils.announce
** Send announcements to: [e-mail]

This list distributes announcements and progress reports on GNU programs
not covered by other GNU mailing lists/gnu.* newsgroups.  It is NOT for
general discussion; please use help-gnu-utils for that.

The list is filtered to remove items meant for info-gnu-utils-request,
that can be answered by the moderator without bothering the list, or
should have been sent to another list.

See section '* General Information about info-* lists'.

* [e-mail] to subscribe to bug-fortran-mode
** USENET newsgroup: (none)
** Fortran mode bug reports to: [e-mail]

This list collects bug reports, fixes for bugs, and suggestions for
improvements in GNU Emacs's Fortran mode (a major mode to support
editing Fortran source code).

It is the place to report Fortran mode bugs by all users of Fortran
mode.

Always report the version number Fortran mode reports on startup as well
as the version of Emacs.

There is no info-fortran-mode list.  There are no USENET gateways to
bug-fortran-mode at this time.

* [e-mail]  to subscribe
** gnUSENET newsgroup: NONE YET
** Send contributions to: [e-mail]

The list is intended to exchange useful information about GNUS, such as
bug reports, useful hooks, and extensions of GNUS.  GNUS is an NNTP-base
network news reader for GNU Emacs (which also works with a news spool).
English and Japanese are the official languages of the list.  GNUS is
quite different than gnews.

* [e-mail]  to subscribe
** gnUSENET newsgroup: gnu.emacs.gnus
** Send contributions to: [e-mail]

The list has the same charter as info-gnus.  The difference is that
English is the only official language of the list.

info-gnus-english/gnu.emacs.gnus is forward to info-gnus, but NOT
vice-versa.

* [e-mail] to subscribe to info-gnews
** gnUSENET newsgroup: gnu.emacs.gnews
** Send contributions to: [e-mail]

This newsgroup is intended to exchange useful information about gnews,
such as bug reports, useful hooks, and extensions of gnews.  gnews is an
NNTP-base network news reader for GNU Emacs (which also works a news
spool).  It is quite different than GNUS.

* [e-mail] to subscribe to gnu-emacs-ada
** gnUSENET newsgroup: NONE PLANNED
** Gnu Emacs Ada support bug reports to: [e-mail]

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in GNU Emacs' editing support of the Ada
programming language.

There are no other GNU mailing lists or gnUSENET newsgroups for GNU
Emacs' editing support of Ada.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] to subscribe to bug-vm
** gnUSENET newsgroup: gnu.emacs.vm.bug
** VM mail reader bug reports to: [e-mail]

This list discusses bugs in View Mail mode for GNU Emacs, with an
emphasis on beta and prerelease versions.

Always report the version number of VM you are using, as well as the
version of Emacs you're running.  If you believe it is significant,
report the operating system used and the hardware.

Subscribers to bug-vm automatically receive all info-vm messages.

* [e-mail] to subscribe to info-vm
** gnUSENET newsgroup: gnu.emacs.vm.info
** Send contributions to: [e-mail]

This list dicusses the View Mail mode for GNU Emacs, an alternative to
rmail mode.

* [e-mail] to subscribe to supercite
** gnUSENET newsgroup: NONE PLANNED
** Send articles to: [e-mail]
*** UUCP: ..!uunet!warsaw.nlm.nih.gov!supercite-request

The supercite mailing list covers issues related to the advanced
mail/news citation package called Supercite for GNU Emacs.

* [e-mail] to subscribe to bug-gnu960
** gnUSENET newsgroup: NONE PLANNED
** Intel 960 Port bug reports to: [e-mail]

This list distributes bug reports for, fixes for bugs in, and
suggestions for improvements in Intel's port of GNU software to the
Intel 960 microprocessor.

You can also fax to: GNU/960 - 1-503-696-4930.

There are no other GNU mailing lists or gnUSENET newsgroups for Intel's
port of GNU software to the Intel 960 microprocessor.

See section '* General Information about bug-* lists and reporting
program bugs'.

* [e-mail] IS NOW DEFUNCT
** DEAD: Gnusenet newsgroup: gnu.emacs.lisp.manual
** DEAD address: [e-mail]
*** DEAD UUCP address: ..!uunet!uiucdcs!gnu-manual-request

This list and newsgroup is dead.  It was a working group whose
volunteers wrote, proofread and commented on the developing GNU Emacs
Lisp programmers manual.

Send bugs in the GNU Emacs Lisp reference manual to:
    [e-mail]

lisp-manual-bugs is neither a mailing list nor a gnUSENET newsgroup.
It's just a bug-reporting address.

* no mailing list request
** gnUSENET newsgroup: gnu.gnusenet.config
** no mailing list

This newsgroup has nothing to do with GNU software, especially its
configuration.  It's exists to distribute information about the
administration and configuration of gnUSENET: the gnu.all alternative
USENET hierarchy that carry the GNU mailing lists.

Administrators of gnUSENET hosts receiving the gnu.all newsgroups are
welcome to ask questions here or via e-mail of [e-mail].

* no mailing list request
** gnUSENET newsgroup: gnu.gnusenet.test
** no mailing list

This newsgroup has nothing to do with GNU software, especially its
testing.  It's exists to allow test messages to be made in gnUSENET: the
gnu.all alternative USENET hierarchy that carry the GNU mailing lists.

Local variables:
mode: outline
fill-column: 72
End:
----------------------------------------------------------------------
enjoy -len

Member of the League for Programming Freedom.
Ask <[e-mail]> via e-mail for information.