home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.sysv386
- Path: sparky!uunet!destroyer!sol.ctr.columbia.edu!ucselx!crash!gpitcher
- From: gpitcher@crash.cts.com (Glenn Pitcher)
- Subject: Re: Getty problem with Interactivee 3.0?
- Organization: CTS Network Services (crash, ctsnet), El Cajon, CA
- Date: 03 Sep 92 07:51:54 PDT
- Message-ID: <1992Sep03.075154.601@crash>
- Keywords: getty init interactive
- References: <1992Aug31.171421.21396@crash>
- Lines: 25
-
- In article <1992Aug31.171421.21396@crash> gpitcher@crash.cts.com (Glenn Pitcher) writes:
- >I just finished fighting my system for most of the day and it's working now,
- >but I sure would like to know what happened...
- >
- >First off, here's our configuration...
- >
- >Dell 433SE running Interactive SVR3.2
- >64MB memory
- >(3) 1.4GB drives (3.8BG formatted)
- >Exabyte 8200 8mm drive
- >Equinox Megaplex-96 board with 4 cluster multiplexors.
- >
- >What seems to have happened is init wouldn't spawn *any* gettys. Not even on
- >the console. Everything else would work fine except for the gettys.
- >My printers even were printing jobs that were left over from the weekend due
- >to no paper and these are hooked to the same muxes as the terminals!
- >I managed to get the system up into init 1 and checked everything. I checked
- >/etc/inittab, I checked getty and init, I checked /etc/gettydefs and almost
- >everything else I can think of. Everything checked out fine.
- >
- >Does anyone have any ideas?
-
- This is a second plea for assistance... my system is down again!! Does any
- one know anything about this?
-
-