home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #19 / NN_1992_19.iso / spool / comp / sys / mac / system / 11589 < prev    next >
Encoding:
Text File  |  1992-09-03  |  1.9 KB  |  50 lines

  1. Organization: Doctoral student, Psychology, Carnegie Mellon, Pittsburgh, PA
  2. Path: sparky!uunet!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!news.sei.cmu.edu!fs7.ece.cmu.edu!crabapple.srv.cs.cmu.edu!andrew.cmu.edu!sr0o+
  3. Newsgroups: comp.sys.mac.system
  4. Message-ID: <EedZt3K00WBO83yUN5@andrew.cmu.edu>
  5. Date: Thu,  3 Sep 1992 14:49:39 -0400 
  6. From: Steven Ritter <sr0o+@andrew.cmu.edu>
  7. Subject: Quadra compatibility
  8. Lines: 40
  9.  
  10. I earlier asked:
  11.  
  12. >Is there a known incompatibility between the Alysis compatibility init
  13. >for the quadra and Superclock?
  14.  
  15. Since no one else seemed to have this problem, I did a little more
  16. checking. Turns out that the following inits (and no others) cause the
  17. problem (running a program that's incompatible with the cache and
  18. clicking on the superclock causes a crash):
  19.  
  20. BeHierarchic 1.0.2
  21. MediaManagerInit 2.23   [used with Mirror Syquest drive]
  22. Superclock 3.9.1
  23. Alysis Compatibility Init 2.2
  24. System 7 Tuneup 1.1.1
  25.  
  26. Removing any of the first three clears up the problem. Also, using
  27. BeHierarchic 1.0.5 clears up the problem, but it creates a different
  28. one: Sometimes, when running a program that's incompatible with the
  29. cache, selecting something from the apple menu (like a control panel)
  30. takes about a minute. The menu goes away, and the apple stays
  31. highlighted until the CP comes up. Once, when I tested this, the system
  32. crashed after the CP came up.
  33.  
  34. Of course, using a different set of inits causes this problem:
  35.  
  36. BeHierarchic 1.0.2 OR SuperClock 3.9.1 [or both]
  37. Alysis Compatibility Init 2.2
  38. System 7 Tuneup 1.1.1
  39. File Sharing Extension
  40. Network Extension
  41.  
  42. If I remove both BeHierarchic and Superclock, everything seems to work
  43. fine. If I use the Apple Cache Control instead of Compatibility Init,
  44. everything works fine, no matter what inits I run (but Cache Control is
  45. a pain). For now, I've turned off BeHierarchic and Superclock, but if
  46. anyone has any information about this, I'd appreciate it.
  47.  
  48. Steve
  49.  
  50.