home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.ps2.hardware
- Path: sparky!uunet!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!convex!dobrott
- From: dobrott@convex.com (Paul DoBrott)
- Subject: Re: PS/2 Mod 80 hardware error
- Message-ID: <dobrott.714924256@eugene>
- Keywords: error 110
- Sender: usenet@convex.com (news access account)
- Nntp-Posting-Host: eugene.convex.com
- Organization: CONVEX Computer Corporation, Richardson, Tx., USA
- References: <1992Aug26.214810.27494@awdprime.austin.ibm.com>
- Date: Thu, 27 Aug 1992 14:04:16 GMT
- X-Disclaimer: This message was written by a user at CONVEX Computer
- Corp. The opinions expressed are those of the user and
- not necessarily those of CONVEX.
- Lines: 26
-
- bob@ashanti.austin.ibm.com (Robert Reynolds) writes:
-
-
- > I've been getting an intermitten error on my PS/2 model
- > 80. I keep getting the following message in the upper
- > left hand corner of the display and the machine locks.
-
- > 110
- > 40000 (S)
-
- > Sometimes the 40000 is 50000 or 90000. I'm fairly sure
- > that it is a memory error but I can't find a manual that
- > tells me what a 110 error is. If anyone knows please let
- > me know. You can either post or email me.
-
- > Thanks.
-
- 110 is system board error; parity check error.
-
- 40000 is the byte address which is bank 1.
-
- A book tittled "Upgrading and Repairing PC's" by Scott Mueller
- has the error messages listed in it. Publisher is QUE.
- This is one of the best books about computers I've come across.
-
- Paul
-