home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!rutgers!ub!acsu.buffalo.edu!dudek
- From: dudek@acsu.buffalo.edu (David T. Dudek)
- Newsgroups: comp.sys.ibm.pc.misc
- Subject: Re: 1024K on an XT?
- Message-ID: <BtnnCF.F29@acsu.buffalo.edu>
- Date: 27 Aug 92 18:29:02 GMT
- References: <2DKPBS7W@dri.com> <1992Aug25.152136.7602@cbfsb.cb.att.com>
- Sender: nntp@acsu.buffalo.edu
- Organization: UB
- Lines: 14
- Nntp-Posting-Host: lictor.acsu.buffalo.edu
-
- If you can find one around, I have this card called the "AMS [for Advanced
- Memory System] HiCard2" which allows you to load drivers, TSR's, RAM-disks
- and print spools into the area between 640k and 1024k. It runs fine on my
- WaveMate 286 XT Bullet Board, but you have to be careful as to which
- drivers you load into high memory (esp. mouse drivers). I really don't
- know if you can buy one new anywhere though. One more thing, it will not
- allow a LIM 4.0 memory card to work if it is installed.
-
-
- --
- --David Thomas Dudek aka: the "DUDE" | "The opinions expressed are those of
- University at Buffalo | my alter id, and do not reflect
- V098PWXS@UBVMS.CC.BUFFALO.EDU | gamma rays in any way, shape or
- dudek@acsu.buffalo.edu | form."
-