home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!mnemosyne.cs.du.edu!nyx!glowe
- From: glowe@nyx.cs.du.edu (Glen Lowe)
- Subject: Re: HELP! Need info on Opti motherboards
- Message-ID: <1992Aug29.000726.21989@mnemosyne.cs.du.edu>
- X-Disclaimer: Nyx is a public access Unix system run by the University
- of Denver for the Denver community. The University has neither
- control over nor responsibility for the opinions of users.
- Sender: usenet@mnemosyne.cs.du.edu (netnews admin account)
- Organization: Nyx, Public Access Unix at U. of Denver Math/CS dept.
- References: <1992Aug20.212431.6629@usenet.ins.cwru.edu> <2203@ncr-mpd.FtC
- Date: Sat, 29 Aug 92 00:07:26 GMT
- Lines: 44
-
- In article <2203@ncr-mpd.FtCollins.NCR.COM> gkendall@ncr-mpd.FtCollins.NC
- .COM (Guy Kendall) writes:
- >In article <1992Aug20.212431.6629@usenet.ins.cwru.edu> ca566@cleveland.F
- eenet.Edu (Michael Holloway) writes:
- > >
- > >Has anyone heard of a motherboard called Opti 386WB? Do you have the
- ame
- > >and phone number of the manufacturer or their US representitive? I ha
- e a
- > >bad motherboard that calls itself an Opti 386WB Ver 1.0, made in Taiwa
- .
- > >The retailer I bought it from is not interested in supporting the prod
- ct
- > >and I was wondering what information I might be able to get either fro
- the
- > >company or from other people with Opti boards. Any information will b
-
- > >appreciated greatly?
- >
- >
- >I havn't heard of the 386WB, but I have been looking at an Opti 486WB
- >motherboard from a clone shop. Anyone know if this is a good
- >motherboard?
- >
- >
- >--
- >Guy W. Kendall - Applications Engineer Guy.Kendall@ColoSpgs.N
- R.COM
- >NCR Microelectronic Products Division Voice: 719-596-5795
- 465
- >1635 Aeroplaza Drive Fax: 719-570-6045
- >Colorado Springs, CO 80916 BBS: 719-596-1649
-
-
- I believe the US rep for opti is somewhere around San Jose, California.
- You might try calling information. I have had quite a few opti
- motherboards and I haven't had any troubles. windows.. dos.. pharlap.. etc
- I'll try 386bsd and linux as soon as i can get the binaries...
-
- Glen Lowe
- UC Irvine
- Department of Information and Computer Science
- 4
-
-