home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!boulder!ucsu!ucsu.Colorado.EDU!yoder
- From: yoder@ucsu.Colorado.EDU (Matt Yoder)
- Subject: HELP!!! Needed for serial card...
- Message-ID: <1992Aug28.014906.23364@ucsu.Colorado.EDU>
- Keywords: serial help
- Sender: news@ucsu.Colorado.EDU (USENET News System)
- Nntp-Posting-Host: ucsu.colorado.edu
- Organization: University of Colorado, Boulder
- Date: Fri, 28 Aug 1992 01:49:06 GMT
- Lines: 35
-
- Okay, here's my question... I need some jumper/DIP switch settings for my
- I/O card.
-
- Specifics:
-
- Manufacturer: SIIG (Suntek Informations International Group)
-
- Layout: 9-pin serial and 25-pin parallel ports on card itself, and game and
- serial connections to a second seperate insert.
-
- There is one set of 4 DIP switches. There are three jumper blocks, two of
- which have four (one might have five) positions. The other simply has two
- positions.
-
- What I need: The settings of the above switches and jumpers so that:
-
- a) the 9-pin serial on the card itself is COM1.
- b) the parallel port is lpt:1.
- c) the other serial (10-pin to seperate insert) is COM3.
-
- If anyone out there has this card, and can help, please let me know these
- settings. Please mail them to me, in fact if at all possible.
-
- (Could at least one random person mail me too, just so I know this went out?)
-
- Thanx...
- *---------------Cut here and you'll break your monitor-----------------------*
- * Matt Yoder \ "Gravitation cannot be held responsible for *
- * yoder@ucsu.colorado.edu \ people falling in love." -- Einstein *
- * yoder@boulder.colorado.edu \ "There's no gravity, the Earth sucks!" *
- * (303) 441-8029 Pager \ (303) 447-1411 Voice *
- *------It's the .sig virus! Come on, copy it in your .sig!------------------*
-
-
-
-