home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #19 / NN_1992_19.iso / spool / comp / sys / hp / 9981 < prev    next >
Encoding:
Text File  |  1992-09-02  |  2.3 KB  |  67 lines

  1. Newsgroups: comp.sys.hp
  2. Path: sparky!uunet!cs.utexas.edu!qt.cs.utexas.edu!yale.edu!ira.uka.de!rz.uni-karlsruhe.de!rz.uni-karlsruhe.de!chris
  3. From: chris@rz.uni-karlsruhe.de (Christian Finger)
  4. Subject: Re: Wren7 drives on HP9000/817??
  5. Message-ID: <1992Sep2.203146.4136@rz.uni-karlsruhe.de>
  6. Sender: usenet@rz.uni-karlsruhe.de (USENET News System)
  7. Reply-To: finger@rz.uni-karlsruhe.de
  8. Organization: Computer Center, University of Karlsruhe, Germany
  9. References:  <1992Sep2.140054.14848@innovus.com>
  10. Date: Wed, 2 Sep 1992 20:31:46 GMT
  11. Lines: 54
  12.  
  13. In article <1992Sep2.140054.14848@innovus.com>, martin@innovus.com (Martin Renters) writes:
  14. | We've recently acquired a Wren 7 disk (1.2G Seagate ST41200N/IMPRIMIS 94601-15)
  15. | drive and it works wonderfully on the 300s and 700s, but the 817 we
  16. | have doesn't want to write to it (well, at least not *most* of the time).
  17. | I have managed to mediainit it (no problems) and fsck a filesystem created
  18. | on a 720, but when I try to newfs it on the 817 I get:
  19. |     write error: 1013774
  20. |     wtfs: Invalid Argument
  21. | My /etc/disktab has the following entry added to it:
  22. | WREN7:\
  23. |         :ty=winchester:ns#35:nt#15:nc#1931:rm#3600:\
  24. |         :s0#1013775:b0#8192:f0#1024:\
  25. [ s1-s15 are the same ]
  26. | Specifying only the s2 parition produces the same result.
  27. | The following entry works on the 720:
  28. | WREN7:\
  29. |     : 1.2G drive:ns#35:nt#15:nc#1931:\
  30. |     :s0#1013775:b0#8192:f0#1024:\
  31. |     :se#512:rm#3600:
  32. | Any ideas?
  33.  
  34. yep.
  35. | Martin Renters                martin@innovus.com
  36. | Innovus Inc.
  37.  
  38. If you compare the output of /etc/diskinfo -v <raw_device> on a s700 and a s800
  39. you will see, that the values given for "blocks per disk" differ.
  40. The s700 shows one block more than the s800.
  41. Setting the partition size to 1013774 for s2 should do the job.
  42. You can use that disk on s700 and on s800 systems.
  43.  
  44. Btw, mkfs will set different rotdelay values (see tunefs(1M)) on s700 and
  45. s800 (trying different values by hand may give you the best performance).
  46.  
  47.  
  48. Hope that helps,
  49.     Christian
  50.  
  51. -- 
  52.   .     Christian Finger         |  Tel   : (+49) 721/608-4038
  53.  |||    Computer Center          |  Fax   : (+49) 721/32550
  54. \|||    University of Karlsruhe  |  EMail : finger@rz.uni-karlsruhe.de
  55.     /   Postfach 6980            |  X.400 : S = finger; OU = rz
  56.         D-7500 Karlsruhe 1       |          P = uni-karlsruhe; A = dpb; C = de
  57.