home *** CD-ROM | disk | FTP | other *** search
- From: hstroyan@hpfcso.FC.HP.COM (Howard Stroyan)
- Date: Mon, 31 Aug 1992 20:46:10 GMT
- Subject: Re: REQUEST: SCSI driver for ScanJet IIc on HP-UX 8.0
- Message-ID: <7371275@hpfcso.FC.HP.COM>
- Organization: Hewlett-Packard, Fort Collins, CO, USA
- Path: sparky!uunet!haven.umd.edu!darwin.sura.net!zaphod.mps.ohio-state.edu!sdd.hp.com!hpscdc!cupnews0.cup.hp.com!hppad.waterloo.hp.com!hppad!hpfcso!hstroyan
- Newsgroups: comp.sys.hp
- References: <1992Aug31.001024.13567@g2syd.genasys.com.au>
- Lines: 22
-
- In comp.sys.hp, craigh@g2syd.genasys.com.au (Craig Hockenberry) writes:
-
- > I would like to run a HP ScanJet IIc in the HP-UX 8.0 environment. This
- > scanner is connected via a SCSI interface, and is supplied with software
- > for either the IBM-PC or the Mac.
-
- This may not be what you have in mind, but there is a 3rd party application
- which supports using the ScanJet IIc on an hpux SCSI. If nothing else it
- provides confirmation that it is possible :-).
-
- The product is "PixelFX" from:
- Mentalix, Inc.
- 1700 Alma Drive #110
- Plano, TX 75075
- Voice: (214)423-9377
- Fax: (214)423-1145
-
-
- --
- Howard Stroyan
- Hewlett-Packard hstroyan@fc.hp.com
- User Interface Technology Division
-