home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!elroy.jpl.nasa.gov!sdd.hp.com!caen!malgudi.oar.net!uoft02.utoledo.edu!desire.wright.edu!cshamis
- Newsgroups: comp.sys.cbm
- Subject: Re: Comm64 acting quirky
- Message-ID: <1992Aug28.135554.3794@desire.wright.edu>
- From: cshamis@desire.wright.edu
- Date: 28 Aug 92 13:55:54 EST
- References: <!97ma4.mvp@netcom.com> <1992Aug18.180517.16403@uwm.edu> <34638@cbmvax.commodore.com> <1992Aug27.000418.15610@cactus.org>
- Organization: Wright State University
- Lines: 16
-
- In article <1992Aug27.000418.15610@cactus.org>, spacek@cactus.org (Mark S. Spacek) writes:
- > Commodore power supplies have always run at least warm, often hot. Especially
- > the older black bricks. The newer white bricks are rated a bit higher and run
- > somewhat cooler. I don't know about servicing them either. The qualified
-
- IMHO, I would suggest going out and getting yourself a 128 power supply,
- they're big, run-cool, and have a fuse in them. NOT TO MENTION THAT THEY ARE
- SCREWED TOGETHER WITH PHILLIPS SCREWS. Makeing them Oh-so-nice to work with.
-
- Only problem is you might have to replace the square DIN connector that plugs
- into a 128. But if you have any comon sense this is not a difficult procedure.
-
- But, thats just me.
-
- CSShamis@Desire.Wright.Edu <==== Me!
-
-