home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apple2
- Path: sparky!uunet!usc!sol.ctr.columbia.edu!destroyer!news.iastate.edu!vincent2.iastate.edu!viking
- From: viking@iastate.edu (Dan Sorenson)
- Subject: SupraFAXModem and SSC in a IIgs w/Proterm 2.2
- Message-ID: <viking.715565962@vincent2.iastate.edu>
- Summary: What's your init string in Proterm 2.2?
- Keywords: help, speed, handshake?
- Sender: news@news.iastate.edu (USENET News System)
- Organization: Iowa State University, Ames IA
- Date: Fri, 4 Sep 1992 00:19:22 GMT
- Lines: 28
-
- Hello!
-
- I'm an incredibly happy camper, having just hooked a SupraFaxModem
- onto my IIgs via super serial card. Yes, my modem port is literally blown
- up, so it's the SSC for me. I'm running ProTERM 2.2, and have been getting
- at least 9600 our of it, possibly a bit more, but there's so much more
- potential to be had.
-
- Has anybody set one of these up on a similar configuration? The SSC
- is set as modem, 19,200 baud, hardware handshaking on, and is connected to
- the modem with a BD-25 cable with all pins connected. I installed this on
- ProTerm using a SSC and Supra 2400, but added a few nifties to it so that it
- would select the highest baud rate, speaker control, and the like.
-
- Anyway, I can tell it's faster than my 2400 baud Datalink (for sale,
- by the way. Offer me some money!), but it's not as fast as I'd like. Any
- hints on how to check for proper handshake, a good init string, and the like
- are greatly appreciated. If the SSC will run faster I'd also like info on
- how to do that, or what other cards might work better in this machine.
-
- Thanks for any/all help you might give.
-
- <Dan Sorenson, DoD #1066 |"There'll be angels on Ariels in leather>
- <z1dan@exnet.iastate.edu | and chrome, Ridin' down from heaven >
- <viking@iastate.edu | just to carry me home." -- R. Thompson >
- < ISU thinks I need more education, which they provide for a fee. >
-
-
-