home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apple2
- Path: sparky!uunet!sun-barr!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!mvats
- From: mvats@magnus.acs.ohio-state.edu (Mudit P Vats)
- Subject: Re: ProTerm 3.0/VT-100 emulator/vi editor
- Message-ID: <1992Aug27.130515.8450@magnus.acs.ohio-state.edu>
- Sender: news@magnus.acs.ohio-state.edu
- Nntp-Posting-Host: bottom.magnus.acs.ohio-state.edu
- Organization: The Ohio State University
- References: <1ncnl-.derich@netcom.com>
- Date: Thu, 27 Aug 1992 13:05:15 GMT
- Lines: 34
-
- In article <1ncnl-.derich@netcom.com> derich@netcom.com (Scott A. Steinbrink) writes:
- >YO, guys.
- >
- > I'm having a problem having my Proterm 3.0 emulate VT-100 on my APple IIGS
- > When I use an UNIX editor (vi for example), it would not function the
- > up/down arrows and right and left arrows do strange things. That's why
- > whenever I need to edit a file or to response alongside a reply, I use another
- > computer. I much rather use my own. Any ideas?
- >
- >
- >- Scott
-
-
- I don't know if there is a patch available for this or not, but the proper
- control keys to press in order to achieve the up/down/right/left are the
- following :
-
- up - CONTROL-p
- down - CONTROL-n
- left - CONTROL-b
- right - CONTROL-f
-
- ------------------
-
- p => previous
- n => next
- b => back
- f => forward
-
- that should help........... later.
- --
- ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
- e-mail : mvats@magnus.acs.ohio-state.edu Mudit P. Vats CIS Eng <OSU>
- ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-