home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu
- From: foegelle@ccwf.cc.utexas.edu (Michael Foegelle)
- Newsgroups: comp.sys.apple2
- Subject: Re: System 6.0 and RamFast SCSI controller card
- Keywords: crashing
- Message-ID: <78262@ut-emx.uucp>
- Date: 23 Aug 92 19:43:46 GMT
- References: <max.714321128@isis> <3287@carroll1.cc.edu> <1992Aug22.061217.14837@cco.caltech.edu>
- Sender: news@ut-emx.uucp
- Organization: The University of Texas at Austin, Austin TX
- Lines: 24
-
- In article <1992Aug22.061217.14837@cco.caltech.edu> toddpw@cco.caltech.edu (Todd P. Whitesel) writes:
- >
- >THE ONLY SOLUTIONS THAT WORK ARE TO EITHER GET RAMFAST ROM 3.0 OR REBOOT INTO
- >PRE-2.0 PRODOS 8 TO RUN PRODOS 8 PROGRAMS.
- >
- Those are NOT the only solutions that work. If you were up on your info, you'd
- know that there is also a patch for Prodos 2.01 (and System 6.0) to turn off
- the remapping so that the RamFast can do it itself. Since the patch is freely
- available (and was run in Incider a month ago for all who don't have telecom
- access), that's a lot cheaper than paying the $18 or so (+S&H) it costs to
- upgrade to the v3.0 ROM in the RamFast, while still using the newer operating
- systems.
-
- Michael Foegelle
-
-
-
- --
- -------------------------------------------------------------------------------
- Michael Foegelle | | foegelle@ccwf.cc.utexas.edu
- ____________ | You want it | foegelle@utaphy.ph.utexas.edu
- | | GEnie: M.FOEGELLE2
- University of | WHEN? | Wunderland BBS (512) 472-0544
- Texas at Austin | | 14.4kbaud, v.32/bis: Sysop
-