home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!sun-barr!cs.utexas.edu!torn!cunews!revcan!sidus!atronx.OCUnix.On.Ca!rwm
- From: rwm@atronx.OCUnix.On.Ca (Russell McOrmond)
- Message-ID: <rwm.714888613@atronx.OCUnix.On.Ca>
- Date: 26 Aug 92 22:10:13 EST
- Newsgroups: comp.sys.amiga.programmer
- Subject: Re: SAS/C 6.0 Details (LONG!)
- In-Reply-To: walker@twix.unx.sas.com (Doug Walker)
- References: <BtHpp5.BDq@unx.sas.com> <Bt8H7F.BL8@unx.sas.com>
- Lines: 23
-
- walker@twix.unx.sas.com (Doug Walker) writes:
- >6.0. However, with 5.10, the installation script did ask you
- >whether you wanted to install 1.3 stuff, so I don't understand
- >what the problem was with installation. Did you call technical
- >support?
-
- All scripts I got, including the upgrades to 5.10a and 5.10b had
- the '2.0' stuff as 'optional', and the 1.3 stuff as required. No, I
- did not call technical support as I assumed since the scripts specifically
- stated this that this was the 'intended' operation.
-
- When I installed SAS 5.10, it was on an A3000 that I had already removed
- the 1.3 partition off of as I felt AmigaDos 1.3 was a waste of disk space.
- If the option existed at any point, I would have used it.
-
- The basic statement is that 6.0 will allow me to install *ONLY* the
- 2.0 includes, which will make installation and upgrades easier.
-
- >=*|_o_o|\\=====Doug Walker, Software Distiller====== BBS: (919)460-7430 =
- --
- Opinions expressed in this message are my Own. I represent nobody else.
- Russell McOrmond rwm@Atronx.OCUnix.On.Ca Net Support:(613) 230-2282(V.32Bis)
- FidoNet 1:163/109 Welmat Help 1:1/139 Current WELMAT 'keeper of sources'.
-