home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #19 / NN_1992_19.iso / spool / comp / sys / amiga / hardware / 14837 < prev    next >
Encoding:
Internet Message Format  |  1992-09-03  |  6.0 KB

  1. Path: sparky!uunet!news.claremont.edu!ucivax!news.service.uci.edu!cerritos.edu!wilbur!qed!analogki
  2. Newsgroups: comp.sys.amiga.hardware
  3. Subject: A3000: Heating up?
  4. Message-ID: <aqyFqB1w164w@qed.cts.com>
  5. From: analogki@qed.cts.com (Jeff Robertson)
  6. Date: 1 Sep 92 21:26:09 GMT
  7. Sender: bbs@qed.UUCP
  8. Organization: The QED BBS, Lakewood CA
  9. Lines: 105
  10.  
  11.  
  12. I have an Amiga 3000 (25Mhz) with 52meg Quantum HD, two internal floppy
  13. drives, 2megs of CHIP RAM and 4megs of FAST RAM. My mom-board rev# is 8.9.
  14.  
  15. It occurred to me one day that my power supply's fan shouldn't be BLOWING
  16. air INTO the machine, as every power supply I have ever seen on a 3000 was
  17. SUCKING air OUT! The same is true for every other power supply for any
  18. computer I have ever seen. Makes sense, too. Sucking air OUT of the machine
  19. seems more efficient in cooling than forcing it in. This action also keeps
  20. DUST from piling up on the IC's.
  21.  
  22. So, seeing as how I bought the machine used and it was clearly out of
  23. warranty, I decided it was simple enough for me to remove the power supply
  24. and reverse the air-flow myself. I did so successfully and also took
  25. advantage of the opportunity to do some much needed dusting. The innards of
  26. the power supply and a good part of the motherboard were filthy!
  27.  
  28. I got the machine back together and running in no time. Later that day, I
  29. started noticing funny things concerning graphics -- programs that had
  30. colorful gadgets, etc. were appearing SCRAMBLED on the screen. Other things
  31. were acting funny, too. My song modules were being unrecognized by their
  32. players (resulting in GURU's), wouldn't load at all or if they did manage
  33. to load, played incoherently. Programs that opened standard console windows
  34. couldn't get it done -- they'd open, then close; locking up the machine or
  35. GURU'ing.
  36.  
  37. All these funny things were happening as I was trying out a new hard drive
  38. on my system. It was a hard drive KNOWN to be buggy with the A3000 -- the
  39. Quantum 240LPS. So, I made the connection between programs not loading
  40. properly to the new drive. I figured I had two strikes against me: 1) I was
  41. told by a tech that "older" A3000 motherboard's SCSI controllers had
  42. trouble dealing with NEWER SCSI devices (i.e. ones that used a 14MHz clock
  43. speed [SCSI II ?!?]) and 2) The Quantum 240LPS with a ROM rev of 4.6 was
  44. said to be bug-ridden. Either of these things must have had SOMETHING to do
  45. with what was going wrong!! (I thought).
  46.  
  47. This didn't make any sense because the problem(s) seemed to affect my OTHER
  48. drive (the 52meg Quantum) as well. I came up with another thought that
  49. maybe the Q240 was just "interfering" with SCSI buss operations. This idea
  50. was backed up by another curiosity I discovered -- my 52meg drive, the
  51. first in the chain, was coming up with a device number of 1 even though it
  52. was hardwired for 6. Strange!  (yes, I had my terminators in the right
  53. places).
  54.  
  55. Something else I should mention is that during all this troubleshooting (it
  56. went on for days, maybe weeks) the ambient room temperature was around
  57. 85-90ish degrees F. I work in a hellish environment sometimes! To test to
  58. see if heat had anything to do with the system failures, I removed the
  59. cover from 3000 and placed a small muffin fan, blowing air across the
  60. motherboard from the right side to the left, concentrating the flow on the
  61. hot spots. This may or may not have lowered the frequency of the strange
  62. occurrences --  just couldn't say for sure.
  63.  
  64. Some time later, I sold off my Q240 drive. I wanted to save up for the
  65. Tower version of the 3000 that already comes with a nice, 200meg+ Quantum
  66. (pre-bugginess, I might add). I could no longer attribute any of my
  67. problems to the addition of the new drive on the system. I was back to my
  68. original setup!
  69.  
  70. The system-funniness didn't go away! The weather conditions were becoming
  71. more favorable, though, and I didn't have to use my air-conditioner at all.
  72. I still kept a fan blowing over the machine, however, and I the frequency of
  73. the random silliness dropped even more. I tried running every piece of
  74. system diagnostic software I could find in hopes of stumbling across some
  75. clue to what was going on. No help!
  76.  
  77. Then, one day as I was fiddling with the "avail" command, I noticed
  78. something incredibly strange about my chip RAM. Avail said I had chip RAM
  79. available in the billions range. Hahah! I starting inspecting chip RAM info
  80. with other system utilities. "SysInfo" would sometimes CRASH and lockup the
  81. machine when it got to the CHIP RAM page. "AmigaRealTimeMonitor" would give
  82. me the same strange readings Avail did. I thought, "okay, maybe there's
  83. something wrong with my FAT AGNUS or maybe the chip RAM itself is bad!"
  84.  
  85. Ahh, but, the problems would come and go. Sometimes I could go a whole day
  86. with anything funny happening. One thing I did notice, though. The problems
  87. never occurred within the first 15-30 minutes of CPU use (after powering up
  88. in the morning). I continued to work on HEAT build-up being the cause. I
  89. would position my fan to cool certain areas of the motherboard only. Most
  90. of the time, I had the fan on the left side of the daughterboard "barrier",
  91. where the chip ram and Fat Agnus are located. I hit peak room temp one day
  92. (even though its mild outside, my room feels like a greenhouse sometimes)
  93. and simultaneously, failures concerning chip RAM cropped up again. Was my
  94. fan helping?   Maybe...
  95.  
  96. To make a long story even longer, I had to finally convince myself that
  97. maybe I should have left the fan where it was! Perhaps forcing air IN was
  98. better in cooling in the case of *my* 3000. And, ya know, one of the OTHER,
  99. more heat-sensitive chips is directly in the path of air flow with the fan
  100. in its original position -- the 68030!!
  101.  
  102. I am going to switch the fan back, right now! If this doesn't end the
  103. funniness once and for all, I just don't know what to think. Luckily, I
  104. haven't lost any data over these lock-ups, but I don't want deal with it
  105. anymore.
  106.  
  107. Comments? Suggestions? Please share them.
  108.  
  109. (Thanks for reading my long story).
  110.  
  111.  
  112.  
  113. ------------------------------
  114. analogki@qed.cts.com (Jeff Robertson)  or  qed!analogki
  115. The QED BBS -- (310)420-9327
  116.