home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cbmvax!daveh
- From: daveh@cbmvax.commodore.com (Dave Haynie)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Reboot with 1.3 using SetCpu under 2.04
- Message-ID: <34791@cbmvax.commodore.com>
- Date: 1 Sep 92 18:50:45 GMT
- References: <1992Aug27.090130.15556@actrix.gen.nz>
- Reply-To: daveh@cbmvax.commodore.com (Dave Haynie)
- Organization: Commodore, West Chester, PA
- Lines: 17
- Keywords: SetCpu ROM
-
- In article <1992Aug27.090130.15556@actrix.gen.nz> keith@actrix.gen.nz (Keith Stewart) writes:
- >I am trying to reboot using SetCpu KICKROM DF1: . I have a 1.3 Kickstart
- >disk in df1:
-
- There are two things you should try. Some Amigas (no way to tell which) have
- 8520s that tend to take a little extra-long to start working after they come
- out of reset. Experimentation with the SetCPU DELAY parameter (takes numbers
- from 1 to 100, default is 10) should eliminate this problem, if that is the
- problem you're having. Chip RAM can't be turned on until one of the 8520s is
- working. Also make sure you're using SetCPU V1.6 -- older versions of SetCPU
- don't have any knowledge of 2.0 and may cause trouble.
-
- --
- Dave Haynie Commodore-Amiga (Amiga 3000) "The Crew That Never Rests"
- {uunet|pyramid|rutgers}!cbmvax!daveh BIX: hazy
- "Work like a horse, drink like a fish" - Psychefunkapus
-
-