home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!usc!sol.ctr.columbia.edu!src.honeywell.com!hwcae!ericj
- From: ericj@hwcae.Honeywell.COM (Eric Jacobsen)
- Subject: Re: Looking for Prototyping board
- In-Reply-To: phsjs@marlin.jcu.edu.au's message of 28 Aug 92 03: 16:14 GMT
- Message-ID: <ERICJ.92Aug28132709@manila.cfsat.Honeywell.COM>
- Sender: news@src.honeywell.com (News interface)
- Nntp-Posting-Host: manila.hwcae.az.honeywell.com
- Organization: Honeywell, Air Transport Division; Phoenix, AZ
- References: <RVILLARI.92Aug26223931@lynx.cat.syr.EDU>
- <ERICJ.92Aug27174455@lagos.cfsat.Honeywell.COM>
- <l9qsh0INNfph@aludra.usc.edu>
- <ERICJ.92Aug27184547@lagos.cfsat.Honeywell.COM>
- <1992Aug28.031614.23528@marlin.jcu.edu.au>
- Date: Fri, 28 Aug 1992 19:27:09 GMT
- Lines: 23
-
- In article <1992Aug28.031614.23528@marlin.jcu.edu.au> phsjs@marlin.jcu.edu.au (Stephen J.Smith) writes:
-
- There is a manufacture number that can be used for test purposes when
- designing a test board. It is 2011 (dec) or 7DB (hex). It is used
- as a "hackers ID" for preliminary boards. We used it here for a
- data acquisition board made not so long ago.
- It was fun to see it appear as "Unknown" with Showcards or SysInfo.
-
- Can you reveal some of the specs for your board? (e.g., number of channels,
- sample rate, etc., etc.?) You have piqued my curiosity, since I did one
- of these once, too (also for academic research).
- --
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Eric Jacobsen Honeywell Inc. *
- | 1-602-436-3941 Commercial Flight Systems, Air Transport |
- * HVN 436-3941 US Mail: P.O. Box 21111, MS 2Q34C1 *
- | FAX 1-602-436-1310 Phoenix AZ 85036-1111 |
- * INet: ericj@hwcae.honeywell.com *
- | UUCP: uunet!hwcae.honeywell.com!ericj@uunet.uu.net |
- * The opinions expressed are my own and therefore better *
- | thought out than my employer's. |
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
-
-