home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!uwm.edu!src.honeywell.com!hwcae!ericj
- From: ericj@hwcae.Honeywell.COM (Eric Jacobsen)
- Subject: Re: Looking for Prototyping board
- In-Reply-To: rvillari@cat.syr.EDU's message of Wed, 26 Aug 92 22: 47:39 EDT
- Message-ID: <ERICJ.92Aug27174455@lagos.cfsat.Honeywell.COM>
- Sender: news@src.honeywell.com (News interface)
- Nntp-Posting-Host: lagos.hwcae.az.honeywell.com
- Organization: Honeywell, Air Transport Division; Phoenix, AZ
- References: <RVILLARI.92Aug26223931@lynx.cat.syr.EDU>
- Date: Thu, 27 Aug 1992 23:44:55 GMT
- Lines: 31
-
- In article <RVILLARI.92Aug26223931@lynx.cat.syr.EDU> rvillari@cat.syr.EDU (R. Alberto Villarica) writes:
-
- I'm looking for an autoconfiguring prototyping board for either Zorro
- II or Zorro III. I remember seeing someone posting about this several
- months ago. Any pointers would be greatly appreciated.
-
- Well, I can attest to the fact that bare Zorro II boards can be had. I
- bought two from somebody who used to advertise in Amazing Computing (if
- I remember correctly), and built up a data acquisition board on one.
-
- THe other has been sitting around waiting for me to get time for a project
- (hahahaha)...
-
- This board is not populated with any parts whatsoever and is a prototyping
- board in every sense of the word. If you wish I can dig them out and see
- who made them...
-
-
-
- --
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
- * Eric Jacobsen Honeywell Inc. *
- | 1-602-436-3941 Commercial Flight Systems, Air Transport |
- * HVN 436-3941 US Mail: P.O. Box 21111, MS 2Q34C1 *
- | FAX 1-602-436-1310 Phoenix AZ 85036-1111 |
- * INet: ericj@hwcae.honeywell.com *
- | UUCP: uunet!hwcae.honeywell.com!ericj@uunet.uu.net |
- * The opinions expressed are my own and therefore better *
- | thought out than my employer's. |
- *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
-
-