home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!seas.smu.edu!utacfd.uta.edu!rwsys!caleb!jdp
- From: jdp@caleb.UUCP (Jim Pritchett)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: NEC 4FG Border-less Display??
- Message-ID: <GTYzr*GT0@caleb.UUCP>
- Date: Thu, 27 Aug 1992 04:59:54 GMT
- References: <alfredo.035y@ajahnv.lonestar.org>
- Organization: is sometimes desirable
- Lines: 40
-
- In article <alfredo.035y@ajahnv.lonestar.org>, Alfredo Jahn V writes:
-
- > I am *very* close to getting a new monitor for my 2000. I would like to
- > get the NEC 4FG (15" MultiSync monitor). I also need a de-interlacer of
- > some kind.
- >
- > I hear that the C= board (flicker fixer-like board) is better than the
- > flicker fixer. The salesman at my local Amiga store told me that, among
- > other things, it gives you a "border-less" display. Is this true? Can I
- > get a "border-less" display with the NEC 4FG? The guy at the PeeCee store
- > told me that "the great thing about the NEC is that you don't get the one
- > inch black border around the display..." Is that the case with an Amiga?
- >
- > I realize that the video slot gets used for the C= (and FF) boards -
- > (and) thats ok (I don't plan on going to a Video Toaster). What I really
- > want is an SVGA quality display. Can I get that with non-flicker interlace
- > mode?
- >
- > Stats: Amiga 2000, rev 4.x mother board, 2.04 and the new custom chip set.
-
- Well, I don't know about the CBM board, but I have the Microway Flicker-Fixer.
- It is great. I use mine with the Sony 1304HG multisync monitor. I get a very
- nice deinterlaced display.
-
- A2000 rev 4.(0|1|2) ?
- GVP 33 Mhz SCSI Combo
- Sony 1304HG
-
- I recently added the ECS Denise and the 2 Meg Agnus to my system. I run both
- 1.32 and 2.04 (switcher) on my system. The FF works nicely either way.
-
- If you have further questions, drop me a note at the address below (I live in
- Fort Worth.)
-
-
- Jim Pritchett
-
-
- UUCP: rwsys.lonestar.org!caleb!jdp
- or utacfd.uta.edu!rwsys!caleb!jdp
-