home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #19 / NN_1992_19.iso / spool / comp / sys / amiga / datacomm / 6069 < prev    next >
Encoding:
Internet Message Format  |  1992-09-02  |  6.5 KB

  1. Path: sparky!uunet!ivgate!mtask!MsgPost.v1.00
  2. From: MsgPost.v1.00@mtask.omahug.org (MsgPost v1.00)
  3. Newsgroups: comp.sys.amiga.datacomm
  4. Subject: [2 of 2] Information from Supra on New ROMS
  5. Message-ID: <69.2aa5f0e5@ivgate>
  6. Date: 02 Sep 92 08:06:08 CST
  7. Reply-To: msgpost.v1.00@mtask.omahug.org
  8. Organization: Multitasking Systems, Kansas City
  9. Sender: news@ivgate.omahug.org (UUscan 1.10)
  10. Followup-To: comp.sys.amiga.datacomm
  11. Lines: 155
  12.  
  13.         AT +FAA=1 (if using class 2) or +FAE=1 (if using class 1)
  14.         AT S0=(1-255)  or ATA
  15.  
  16.         Result Codes:  CONNECT XX if data call
  17.         FAX if fax call
  18.  
  19.         NOTE:  This sequence must be sent before every answer
  20.  
  21. Implements ECM  (Error Correction Mode)
  22.         Allows the fax software to resend a block of information if it is not
  23. received
  24. correctly by the other modem.  This feature MUST be supported by the fax
  25. software in order to be used.
  26.  
  27. Implements BFT mode (Binary File Transfer)
  28.         Allows the user to send a file to another fax modem as if it were a
  29.         fax instead of a file.  This feature MUST be supported by the fax
  30.         software in order to be used. This allows the user to use the fax
  31.         software to send the file instead of using a terminal program.
  32.  
  33. Fixes problem with DCD line turning off if modem configured with &C
  34.         If the modem was configured with the &C, especially during a
  35.         disconnect, the modem would toggle DCD line.  This problem only
  36.         affected a small percentage of users, generally those running BBSes
  37.         on the Apple II.
  38.  
  39. &Dx and &Cx settings are respected when in fax mode
  40.         The CCITT TR29.2 committee has not defined how the modem should
  41.         react to the &D and &C settings when in class 2 fax mode.  While the
  42.         committee has not defined this, there is a strong sentiment for
  43.         respecting the &D and &C settings as it is handled in class 1 and
  44.         when the modem is in data mode.  This also allows the modems to work
  45.         better under fax mode in the Unix enviorment.
  46.  
  47. Fixes problem connecting with some fax machines
  48.         The 1.2C roms had a few problems making connections to some fax
  49.         machines.  The fax machine used a slightly different tone when
  50.         answering.  This resulted in the two machines toning back and forth,
  51.         not making a connection and then eventually hang up. This problem
  52.         only happened to a small percentage of users.
  53.  
  54.  
  55. Added S-Register S109
  56.         Controls speeds available for V.32bis carrier handshake, or the
  57.         carrier rate to negotiate error correction, if S-Register S110=3.
  58.  
  59.         Decimal Value   Explanation
  60.                 1       reserved
  61.                 2       4800 bps
  62.                 4       7200 bps
  63.                 8       9600 bps
  64.                 16      12000 bps
  65.                 32      14400 bps
  66.                 64      reserved
  67.                 128     reserved
  68.  
  69. Added S-Register S110=3
  70.  
  71.         V.32bis standard negotiates carrier speed at 4800 baud then jumps to
  72.         the agreed carrier speed to negotiate error correction/data
  73.         compression.  On noisy lines this can cause various connection
  74.         problems.  Supra's solution is to set S-Register S110 to 3.  This
  75.         causes the modems to connect at the slowest possible V.32 or V.32bis
  76.         speed.  Once this is done, as long as the line is clean enough, the
  77.         modems will up-shift to the next possible carrier rate.
  78.  
  79.         The slowest possible carrier speed can be limited by the use of
  80.         S-register S109.
  81.  
  82. NOTE:   Some modems can only up-shift a few times and then they will lose the
  83.         connection  (especially Supra V.32 and V.32bis with ROMs < 1.2C).
  84.         The solution is to change S-Register S109 so that it does not need
  85.         to up-shift as many times.
  86.  
  87. NOTE:  This only works when the modem is originating the call.
  88.  
  89. Implements Silent Answer (allows voice/fax determination)
  90.         When the phone rings, the modem will start monitoring the telephone
  91.         line after the 2nd ring.  If it detects a fax tone, it will do one
  92.         of two things:
  93.  
  94.         1.      If S-Register S0 - 0, the modem will immediately answer the
  95.                 phone and attempt a fax connection.
  96.  
  97.         2.      If S-Register S0 = 0, the modem will quickly issue up to 9
  98.                 RINGS messages, expecting the fax software to issue an ATA.
  99.  
  100.         This eliminates the need for a $150 voice/fax black box.
  101.  
  102. NOTE:   DO NOT plug the answering machine into the telephone jack on the back
  103.  
  104.         of the modem.  The modem should be plugged into the answering
  105. machine.
  106.         This also also works if a telephone is in the circuit before the
  107.         faxmodem.
  108.  
  109. NOTE:   This mode must be supported by the fax software.
  110.  
  111. Implements Caller ID
  112.  
  113.         This is a feature is only available in some areas of the country.
  114.         In between the 1st and the 2nd ring, the phone company will send
  115.         information on who is calling you.  If you ere in terminal mode and
  116.         had told the modem to answer on the 3rd ring, you would see:
  117.  
  118.                 RING
  119.  
  120.                 DATE = 0321
  121.                 TIME = 1405
  122.                 NMBR = 5039672400
  123.                 NAME = SUPRA CORPORATION
  124.  
  125.                 RING
  126.  
  127.                 CONNECT 19200
  128.  
  129.         To enable CALLER ID:
  130.  
  131.                 AT#CID=1        Enables Caller ID in formatted format
  132.                 AT#CID=2        Enables Caller ID in unformatted format
  133.                                 (ASCII printable hex numbers)
  134.                 AT#CID=0        Disables Caller ID
  135.  
  136.  
  137. In addition to the enhancements and corrections noted above, Supra's new 1.2G
  138. ROM release also includes modifications that were implemented in the previous
  139. 1.2C ROM release.  They are as follows:
  140.  
  141. %G0     disables Rate Renegotiation on V.32bis
  142.  
  143. %G1     enables Rate Renegotiation on V.32bis
  144.         enables Rate Renegotiation and Retrain on V.32
  145.  
  146. %E      has not changed, but if both %G1 and %E1 are set, then the modem will
  147.         Rate Renegotiate during a Retrain.  This is also the only way the
  148. V.32
  149.         modem can Rate Renegotiate.
  150.  
  151. AT&F1 and AT&F2 defaults now include %G1
  152.  
  153. S-Register S110:
  154.  
  155.         0       causes connect at V.32 only
  156.         1       enable V.32bis on V.32bis modems
  157.         2       enable V.32bis and automatic rate renegotiation.
  158.  
  159.  
  160. Fixed several problems on the fax side of the modem
  161.  
  162. .............................................................................
  163.           tredysvr!cellar!swinokur -or- swinokur@cellar.uucp -or-
  164.                           GEnie: S.WINOKUR  -or-
  165.                   435 Norristown Road, Horsham PA, 19044
  166. ..................... Amiga: Hey, at least it works! ........................
  167.  
  168.