home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!stanford.edu!agate!usenet.INS.CWRU.Edu!slc6!trier
- From: trier@slc6.ins.cwru.edu (Stephen C. Trier)
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Subject: Re: Question: using QEMM and packet drivers simultaneously
- Date: 2 Sep 1992 15:23:42 GMT
- Organization: Case Western Reserve University, Cleveland, OH (USA)
- Lines: 18
- Message-ID: <182m9vINNtj@usenet.INS.CWRU.Edu>
- References: <1992Sep2.135723.2437@tamsun.tamu.edu>
- NNTP-Posting-Host: slc6.ins.cwru.edu
-
- In article <1992Sep2.135723.2437@tamsun.tamu.edu> sam3103@tamsun.tamu.edu (Stan McClellan) writes:
- >I hope this isn't a FAQ 8}
-
- It is, but it's not listed in the FAQ file because there isn't one. :-)
-
- >Whenever I specify the RAM command line switch for QEMM (which is supposed
- >to make hi RAM available for loading TSRs, etc) I can't load the packet
- >driver properly ... the keyboard locks up.
-
- Use the exclude option to make QEMM aware of the network card's address
- space. The same goes for EMM386 and any other memory manager, including
- Windows.
-
- --
- "Beware of programmers who Stephen Trier
- carry screwdrivers." Network Services Engineering, IRIS/INS/Telecom
- Leonard Brandwein Case Western Reserve University
- trier@ins.cwru.edu
-