home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.protocols.tcp-ip.ibmpc:4989 comp.os.ms-windows.apps:2373
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!rphroy!kocrsv01!thoeny
- From: thoeny@kocrsv01.delcoelect.com (Mike Thoeny)
- Newsgroups: comp.protocols.tcp-ip.ibmpc,comp.os.ms-windows.apps
- Subject: Novell 3.11, WinQVT/Net, AST 486/33 problem solved!
- Message-ID: <1992Sep1.173901.19344@kocrsv01.delcoelect.com>
- Date: 1 Sep 92 17:39:01 GMT
- Sender: news@kocrsv01.delcoelect.com (Usenet News Account)
- Organization: Delco Electronics Corp.
- Lines: 23
- Originator: thoeny@koadsy06
-
-
-
- On August 14, I asked a friend to post a question asking how
- I could get WinQVT/Net to coexist with Novell Netware 3.11 on
- my AST 486/33 PC. Thanks to those who replied, I'm up and
- running. I had been trying to get winpkt to work with my setup,
- and it was not necessary for what I was trying to do. The following
- added to my autoexec file does the trick!
-
- lh lsl link support layer
- lh 3c507 ODI driver. ethernet 802.3 and ethernet_II frames
- selected in net.cfg file
- lh odipkt 1 packet driver interface to ODI driver
- lh pktint
- lh ipxodi
- lh netx
-
- Thanks again to those who replied!
-
- --------------------------------------------------------------------------
- Mike Thoeny Internet: thoeny@kocrsv01.delcoelect.com
- Project Engineer, Advanced Development
- Delco Electronics Corporation GM: c22mbt (clipcva)
-