home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.protocols.tcp-ip:4252 comp.protocols.tcp-ip.ibmpc:4982
- Path: sparky!uunet!mcsun!sun4nl!ptt-iat.uucp!starrenb
- From: starrenb@ptt-iat (John Starrenburg)
- Newsgroups: comp.protocols.tcp-ip,comp.protocols.tcp-ip.ibmpc
- Subject: HELP with hanging NetCI in UB's TCP BNS/NDIS with UCX 2.0
- Keywords: UCX, UB, TCP, NDIS
- Message-ID: <408@ptt-iat>
- Date: 1 Sep 92 11:28:19 GMT
- Followup-To: poster
- Organization: PTT Telecom B.V. I&AT NWDS-DS-OOTA , Groningen The Netherlands
- Lines: 23
-
- Whenever I do a DISCONNECT from The Connection Assistant (NetCI), the session
- manager that is integrated with Ungermann-Bass' TCP/IP stack for the PC,
- TCP BNS/NDIS, and I am connected to a VAX with UCX 2.0, NetCI hangs. The
- problem is probably because UCX 2.0 sends a logoff message after the TCP/IP
- FINish, which is conform the RFC. When tested against MultiNet or a UNIX box,
- everything works fine. These stacks don't send any further data after the FIN
- from the PC. The PC itself works fine after the hanging NetCI, but when I
- try to start my Windows Comms package DynaComm (or Reflection), no NetCI
- prompt appears. NetCI uses software INT 6Bh for communication with these
- comms pacakges. The reason why I think it is NetCI that is failing is because
- the DOS versions of FTP and Telnet work fine. I assume these progs interface
- with the TCP/IP stack directly, instead of the comms packages which use
- NetCI as session manager.
- Hope this is enough information for those who might know the answer. Any
- help and/or clues are GREATLY APPRECIATED, because we are approaching a
- deadline.
- Thanx in advance.
- ____
- John
- --
- ---------------------------------------
- John Starrenburg I&AT PTT Telecom
- Internet: starrenb%ptt-iat@nluug.nl
-