home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.protocols.appletalk
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!sdd.hp.com!ux1.cso.uiuc.edu!news.iastate.edu!pi.eai.iastate.edu!bryan
- From: bryan@pi.eai.iastate.edu (Bryan Manske)
- Subject: Would like some help with CAP6.0lp100
- Message-ID: <1992Aug31.162754.22461@news.iastate.edu>
- Originator: bryan@IRIX
- Sender: news@news.iastate.edu (USENET News System)
- Reply-To: bryan@pi.eai.iastate.edu (Bryan Manske)
- Organization: EAI, Iowa State University, Ames, IA
- Date: Mon, 31 Aug 1992 16:27:54 GMT
- Lines: 34
-
-
- Since grovelling in other venues has had little effect, I'll try it
- here, since it seems that CAP is discussed here quite frequently.
-
- My problem is in basic CAP setup. In other words, setting up the
- 'bridge_desc' and 'etalk.local' files. No, etalk.local does NOT get
- set up correctly by UAB when its run. And the net.numbers just don't
- come out right.
-
- Any help in getting this to work, any discussion to help get the ideas
- bouncing around in my head, would be most appreciated.
-
- Specifics: SGI Personal Iris 4D/35
- Irix 4.0.1
- Want to use UAB
- One Mac IIci with 7.0.1 w/ asante 3Com E-net board.
- etalk.local file that comes out all zeros
- Builds and installs fine. Appears to run fine.
- Snitch doesn't have any net.numbers to run with.
- AUFS doesn't appear to have any net.numbers to run with.
- One vaguely frustrated guy (me).
-
- Thanks in advance.
-
-
- Bryan.
-
-
- --
- Bryan Manske (515) 296-9908 .
- Engineering Animation, Inc. . I'm sorry, Dave,
- bryan@pi.eai.iastate.edu . I'm afraid I can't do that.
- #include <caveat_opinion.h> .
- #include <standard_disclaimer.h> . HAL and I.
-