home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.protocols.appletalk
- Path: sparky!uunet!sun-barr!ames!agate!linus!linus.mitre.org!can@mitre.org
- From: can@mitre.org (Christopher A. Nissen)
- Subject: Confirm Failed in CAP
- Message-ID: <1992Aug26.125821.5083@linus.mitre.org>
- Sender: news@linus.mitre.org (News Service)
- Nntp-Posting-Host: chris-nissen.mitre.org
- Organization: The MITRE Corp
- Date: Wed, 26 Aug 1992 12:58:21 GMT
- Lines: 23
-
- I am using cap under SunOS 4.1.2 to print on a Textronix Phaser III
- color laserwriter that is connected to AppleTalk via a fastpath gateway.
- The printer works fine when printing from Macs and all 'atlooklws' and
- 'lwpr' commands go smoothly for the other printers in the same zone.
- However, I get the following error from 'atlooklws' when checking on the
- Textronix Printer:
-
- "Confirm Failed, code = -1025..." instead of the usual
- "Adress confirmed for socket XXX".
-
- Therefore, I can never print to the printer since I get deluged with "not
- responding" and "no status" errors.
-
- Again, the printer is Postscript Level II compatible and IS talking with
- CAP since it reports its assigned printer name OK.
-
- The printer is in another zone than the Workstation, but like I said, I
- don't have trouble printing to the other printers in that zone.
-
- Any suggestions??
-
- Thanks
-
-