home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.apps
- Path: sparky!uunet!usc!venice!gumby.dsd.trw.com!deneva!mamacass!reimert
- From: reimert@mamacass.etdesg.trw.com (Scott P. Reimert)
- Subject: NDW 2.0 under WinOS2 (help request)
- Message-ID: <2AA431E9.5B1C@deneva.sdd.trw.com>
- Sender: news@deneva.sdd.trw.com
- Organization: TRW Inc., Redondo Beach, CA
- Distribution: usa
- Date: Wed, 2 Sep 92 03:15:53 GMT
- Lines: 27
-
- I have re-installed NDW 2.0 in my WinOS2 setup, but it fails to load. It
- gets almost all the there, to the point where it's placing the viewer, icon-
- editor, etc, on the desktop, then it dies with an error code like:
-
- Fatal trap x0004
-
- Or something close to that. It flashes the error message, then terminates
- the WinOS2 session completely and leaves me at the WPS again. I've tried
- migrating it, and I followed the readme regarding the WinShield=0, but have
- had no joy.
- I know this can work, because I had it working at one time (before a
- catastrophic disk problem). I just can't figure out what I did last time.
- For what it's worth, here is some system config junk:
-
- 486/33 AMI *motherboard* w/ 8MB RAM
- Microp 330MB SCSI HD
- Adaptec 1542b
-
- Any help is appreciated,
-
- Scott
-
- --
- -------------------------------------------------------------------------------
- Scott Reimert \ reimert@mamacass.etdesg.trw.com /Standard disclaimer:
- Redondo Beach, CA \______________________________________/"Blah blah blah ... "
- __________________|Always store beer in a cool dark place|_____________________
-