home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.mail.elm
- Path: sparky!uunet!cs.utexas.edu!sun-barr!ames!haven.umd.edu!darwin.sura.net!mlb.semi.harris.com!controls.ccd.harris.com!tsp
- From: tsp@controls.ccd.harris.com (Timothy S. Pillsbury)
- Subject: Re: aliases under SCO ODT
- Message-ID: <1992Aug28.152614.27767@ccd.harris.com>
- Originator: tsp@sp1
- Sender: tsp@controls (Timothy S. Pillsbury)
- Organization: Harris Controls and Compositions
- References: <17j0neINNmh5@agate.berkeley.edu> <5@btoy1.UUCP>
- Date: Fri, 28 Aug 1992 15:26:14 GMT
- Lines: 46
-
-
- In article <5@btoy1.UUCP>, mrbulli@btoy1.UUCP (Thomas Bullinger) writes:
- |> gridley@toe.CS.Berkeley.EDU (Frank Gehrke) writes:
- |> : Try as I may, I am unable to get the aliases function
- |> : to work withn elm23pl11. I have a valid, at least new-
- |> : alias doesn't spit back any errors, alias file. But when
- |> : I attempt to use an aliase, it does not function. BTW, the
- |> : (l)ist does list the alias.test file so I don't think its
- |> : a path problem.
- |> :
- |> : If suggestions are e-mail pleas use:
- |> : gridley@snow.water.ca.gov
- |> :
- |> : Thanks
- |>
- |> I ran into the very same problem. But finally I was able to solve it:
- |> Make sure that you compile all source with no optimizations!
- |>
- |> To accomplish that, set all occurences of "OPTIMZE" in the makefiles to
- |> "-Od" - then it works.
- |>
- |> Syd, if you copy, you may put that into the documentation (or FAQ file).
- |> --
- |> /-------------------------------------------------------------------------\
- |> | Thomas Bullinger | INTERNET: bulli@kodak.com ...uunet!btoy1!mrbulli |
- |> | (716)253-7958 | COMPUSERVE: 76535,2221 |
- |> | | FIDO: Thomas Bullinger @ 1:260/228.12 |
- |> \-------------------------------------------------------------------------/
- |> ______ __ _ _
- |> / / / ) // //
- |> / /_ __________ __. _ /--< . . // // o ____ _, _ __
- |> (_/ / /_(_) / / / <_(_/|_/_) /___/_(_/_</_</_<_/ / <_(_)_</_/ (_
- |> /|
- |> |/
-
- I also was having problems getting my aliases to function (even though
- the list function said they were there).
-
- I read the faq and my problems were solved. Just run newalias at the command
- line and the aliases.hash and aliases.data files are magically updated. After
- that, elm can remember my aliases just fine!
- --
- -------------------------------------------------------------------------------
- Tim Pillsbury Internet: tsp@ccd.harris.com
- uunet: uunet!ccd.harris.com!timothy.pillsbury
- -------------------------------------------------------------------------------
-