home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.sys.cisco
- Path: sparky!uunet!sun-barr!ames!pacbell.com!rtech!odinba!alan
- From: alan@BofA.COM (Alan Hobesh)
- Subject: Cisco Secondary address
- Message-ID: <1992Sep2.231039.1131@BofA.com>
- Sender: alan@BofA.com (Alan Hobesh)
- Organization: Bank of America, Capital Products, RMTG #5906
- Date: Wed, 2 Sep 92 23:10:39 GMT
- Lines: 18
-
-
- Sorry, if this is a simple question, but we are new to Cisco.
- Please reply to alan@bofa.com. I will post replies if appropriate.
-
- We have an AGS+, version 9.0(1). We have configured a token ring interface
- with a secondary address. This address is primarily composed of a network
- of Sun work stations.
-
- All the Sun Workstations on the network can ping the router and telnet into it,
- and a "show ip route" on the router displays the network as being Connected. Also
- the arp table shows the correct MAC level address of any sun who pings or telnets
- to the router. The problem is that the Router can not ping the Suns or telnet
- into any of the sun hosts.
-
- I don't understand why this should be the case.
-
-
- Thanks.
-