home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!uvaarpa!murdoch!cebaf4!sabrom
- From: sabrom@cebaf4.cebaf.gov (Seth Bromberger)
- Newsgroups: comp.dcom.modems
- Subject: Re: Summary of prices... (PPI, in particular)
- Message-ID: <1992Aug27.192439.27029@murdoch.acc.Virginia.EDU>
- Date: 27 Aug 92 19:24:39 GMT
- References: <BtnM4B.Ann@apollo.hp.com>
- Sender: usenet@murdoch.acc.Virginia.EDU
- Reply-To: sabrom@cebaf4.cebaf.gov (Seth Bromberger)
- Organization: CEBAF
- Lines: 33
-
- In article <BtnM4B.Ann@apollo.hp.com>, goykhman_a@apollo.hp.com (Alex
- Goykhman) writes:
- > Mine hangs all the time during ZMODEM downloads (from Channel 1,
- Cambridge,MA)
- > both with Telix 3.15 and Robocomm 4.2. Tt appears to work with
- WINQVT, but
- > I can't figure out why...
- >
- > Stay away from PM14400FXSA.
- >
- > --
- >
- ------------------------------------------------------------------------
- -----------
- > Disclaimer: all opinions are mine.
- >
- ------------------------------------------------------------------------
- -----------
-
- I, too, have had some problems with 14400FXSA Zmodem xfers... but I've
- found that when I'm not using MNP5, things run smoothly (this is on a
- 2400 connection)... in fact, I can get around 3100 chars/sec on a 14400
- connection with compression/correction. Maybe the problem has to do
- with the additional compression of MNP5?
- All in all, I'm quite pleased with my 14400FXSA.
-
- Suggestions or solutions welcome, as I'd like to not have to disable
- MNP5 for these connections.
-
- Seth Bromberger
- sabrom@cebaf.gov
-
- #include <disclaimer.h> /* standard disclaimer: all opinions are mine. */
-