home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: bit.listserv.sas-l
- Path: sparky!uunet!uvaarpa!darwin.sura.net!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!usenet.coe.montana.edu!news.u.washington.edu!raven.alaska.edu!acad2.alaska.edu!axpmw
- From: axpmw@acad2.alaska.edu
- Subject: HPpaintjet w/SAS 6.06 VMS
- Message-ID: <1992Sep4.102527.1@acad2.alaska.edu>
- Lines: 26
- Sender: news@raven.alaska.edu (USENET News System)
- Nntp-Posting-Host: acad2.alaska.edu
- Organization: University of Alaska
- Date: Fri, 4 Sep 1992 14:25:27 GMT
-
- VAX/VMS SAS 6.06 Graphics - Using a HPPAINTJET!
-
- 1) Has anyone ever gotten a terminal connection to a hp paintjet printer
- sas job to work? I'm using the HPPJ180 device drive (or attempting to..)
-
- 2) The terminal is serial, printer parallel and we have a little black
- box connected between them to make them talk to each other. The terminal
- is directly connect to the VAX and we're running a simple piechart program
- with the goptions line:
-
- GOPTIONS DEVICE=HPPJ180 autofeed handshake=xonxoff ftext=swiss
- colors=(black yellow gold cyan blue red green);
-
- Any ideas? the stuff just comes to the screen and doesn't toggle on
- the printer... we've tried doing screen dumps but since that
- doesn't use a device driver we doubt it will work.
-
- 3) If you can send us your configuration that works w/ an hppaintjet and
- sas it would help!
-
- Thanks in advance, Pam
-
- --
- Pam Woods Email: Internet: axpmw@acad2.alaska.edu
- University Of Alaska Anchorage Bitnet: axpmw@alaska
- System: A3000/25/40Mb/Wb2.04/88mbsyquest
-