home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!munnari.oz.au!ariel!ucsvc.ucs.unimelb.edu.au!lugb!lucifer!gareth
- From: gareth@lucifer.latrobe.edu.au (Gareth Davies)
- Newsgroups: vmsnet.networks.tcp-ip.ucx
- Subject: UCX errors...
- Keywords: help, gurus needed, quite lost
- Message-ID: <1992Aug20.062732.15156@lugb.latrobe.edu.au>
- Date: 20 Aug 92 06:27:32 GMT
- References: <2445@mitech.com>
- Sender: news@lugb.latrobe.edu.au (USENET News System)
- Organization: La Trobe University
- Lines: 55
-
-
- Fellow UCX'ers...
-
- I have recently installed UCX V1.3 and have encountered a couple of problems
- already :-(
-
- Problems...
-
- 1). When trying to use FTP...
-
- ftp> open
- (to)atr2.medrmh.unimelb.edu.au
- %UCX-E-FTP_NETERR, I/O error on network device
- -SYSTEM-F-INSFMEM, insufficient dynamic memory
-
- Ideas??
-
- 2). Similar problems with TELNET...
-
- ATR1_$ telnet atr2.medrmh.unimelb.edu.au
- Trying...128.250.115.12
- %UCX-E-TELNET_CONECT, Failed to connect to remote host
- -SYSTEM-F-INSFMEM, insufficient dynamic memory
-
- Again, any ideas what's wrong here?
-
- 3). Finally if a telnet session does get through, it quite often terminates
- half way through with the following error...
-
- %UCX-E-TELNET_WRTERR, Failed to write on socket
- -SYSTEM-F-UNREACHABLE, remote node is not currently reachable
-
- Again, slightly lost here too ...
-
- I've just tried...
-
- ATR1_$ UCX STOP COMMUNICATION
-
- closely followed by a ...
-
- ATR1_$ @SYS$MANAGER:UCX$INET_STARTUP.COM
-
- This seems to have helped but it could just be a coincidence :-)
-
- Any comments appreciated.
-
- Hope I've been discriptive enough...
-
- Thanks,
-
- Gareth.
-
- --
-
- gareth@lucifer.latrobe.edu.au
-